上海开阖软件有限公司
我们就是那个传说中的开阖软件
我们开源的产品是
开源的企业信息化主板
无名天地之始。有名万物之母。
产品：尽力为简 Enough is good
定位年销售额2千万至2亿元的单体企业。开源产品覆盖70%客户业务场景。不多不少，刚刚好。
项目：按需就繁 More is better
更细致的权限划分、更实时的外部接口、更个性化的合同模板、更具洞察力的统计报表。你需要二次开发并对变更有源码级控制。
客户：选择自由 Best run
全面规划，分步实施，重点突破，效益优先。先期投资不因更换供应商而损失，数据完全自己掌控。
VIP运行支持
2000元每客户
日常应用支持，软件故障排除，错误数据修复，版本更新
不含二次开发部分
二次开发服务
25小时/一万元
二次开发人员为开阖软件资深顾问，从业年限在3年以上，GoodERP项目核心开发人员，任意难度的二次开发，适用于自主实施的企业
总监技术支持
12小时/一万元
支持人员为开阖软件技术总监，GoodERP项目发起者
客户整体信息化战略规划，行业化解决方案设计
GoodERP云实施
5千元/上线用户
公有云上实施，私有云中运行，保护您的数据安全。开阖项目经理掌控项目计划和进度，二次开发每周持续交付，含better模块部署
上一套GoodERP到底要多少预算？
我们不希望做出无依据的判断，同时也理解客户需要一个大致的成本范围。由于软件完全免费，项目投资完全用于购买实施和二次开发的顾问时间。根据我们的经验：
1、每用户的上线成本平均在5000元，乙方才能保证最终用户的满意度
2、年IT投入不高于客户上年营业额的千分之三（指传统行业，电商或互联网创业公司应占全年支出的至少30%）
有了2作为高限，1作为低限，根据企业信息化“总体规划、分步实施”的原则，或者说“花多少钱办多少事”的务实精神，相信您已经有了科学合理的ERP投资计划查看:8705|回复：20
初级工程师
首先说下我的笔记本配置
清华同方锋锐U410
CPU: I3-3227U
主板：HM76
硬盘：128GB SSD
显卡：核显
系统版本：ubuntu13.10
问题描述：
屏幕偶尔会无征兆的抖动，显示出来的是很小的黑色小横线，满屏都是，开始以为是驱动问题，接着重新安装了驱动，接着设置分辨率和刷新率完毕，还是会出现，就是在桌面拖动窗口的时候出现最频繁，浏览网页滚动页面也会出现，再次以为还是内核的问题，又下载新内核3.13.6进行编译安装，结果还是那么悲剧. 如此不稳定难道是要逼我放弃Linux？
有没有哪位哥们也遇到这情况，或者各位能有什么解决的方法给透漏下，感激不尽啊
CPU型号I3-3227U
CPU型号I3-3227U
本帖最后由 小鬼忻3 于
11:22 编辑
初级工程师
建议你安装其它的操作系统试试，如Windows7，看看是否有同样的故障出现，如果有，则说明不是软件的问题，而是硬件的问题。
中级工程师
...如果抖动，那自己也进入同步频率。
...如果看不清，那就脑补吧。
会不会是你的显卡接触不良啊？
或者显示器刷新频率设置得太低？
楼主看下，如果还是不能解决，我们再想其他办法！
初级工程师
一步一步的来，先换成其它的操作系统试试，如果没问题就是系统的事，如果还是有相同的问题再分析是不是硬件的问题！
初级工程师
引用:原帖由 pudj 于
11:07 发表
建议你安装其它的操作系统试试，如Windows7，看看是否有同样的故障出现，如果有，则说明不是软件的问题，而是硬件的问题。 WINDOWS沒有問題，就是Linux有這問題
初级工程师
引用:原帖由 what250 于
08:37 发表
一步一步的来，先换成其它的操作系统试试，如果没问题就是系统的事，如果还是有相同的问题再分析是不是硬件的问题！ 原本就是雙系統，Windows是沒有任何問題的
初级工程师
引用:原帖由 小鬼忻3 于
08:31 发表
会不会是你的显卡接触不良啊？
或者显示器刷新频率设置得太低？
楼主看下，如果还是不能解决，我们再想其他办法！ 斑竹，木有顯卡，是核顯
初级工程师
引用:原帖由 lszhabcd 于
22:27 发表
...如果抖动，那自己也进入同步频率。
...如果看不清，那就脑补吧。 同步頻率？是指什麼？刷新率？還是另有說法？如果是刷新率的話我已經設置過
引用:原帖由 wei 于
08:46 发表
斑竹，木有顯卡，是核顯 没看清楚。。。抱歉。。
初级工程师
其它版本的linux呢？试过没。
目测是显卡带不动桌面- -
楼主用的桌面是KDE还是gnome？换成xfce4试试？
高级工程师
猜测是帧缓存模式没有开启引起的，内核加载fbdev模块
最好能贴出你的X界面登录日志/var/log/Xorg.0.log，仅凭现象很难判断。
本帖最后由 chengchow 于
16:47 编辑
初级工程师
引用:原帖由 金兔儿 于
09:33 发表
目测是显卡带不动桌面- -
楼主用的桌面是KDE还是gnome？换成xfce4试试？ 原来安装的是ubuntu13.10.现在换了linux deepin2013还是一样，linux deepin的桌面应该不会用到很大的资源吧
初级工程师
引用:原帖由 chengchow 于
16:28 发表
猜测是帧缓存模式没有开启引起的，内核加载fbdev模块
最好能贴出你的X界面登录日志/var/log/Xorg.0.log，仅凭现象很难判断。 [& & 14.013]
X.Org X Server 1.13.3
Release Date:
[& & 14.013] X Protocol Version 11, Revision 0
[& & 14.013] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[& & 14.013] Current Operating System: Linux wei-PC 3.13.6 #2 SMP Mon Mar 10 13:38:36 CST
[& & 14.013] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.6 root=UUID=d03a055e-a0df-4e43-e22bf81 ro locale=zh_CN quiet splash vt.handoff=7
[& & 14.013] Build Date: 16 October :00PM
[& & 14.013] xorg-server 2:1.13.3-0ubuntu6.2 (For technical support please see )
[& & 14.013] Current version of pixman: 0.30.2
[& & 14.013] & & & & Before reporting problems, check
& & & & to make sure that you have the latest version.
[& & 14.013] Markers: (--) probed, (**) from config file, (==) default setting,
& & & & (++) from command line, (!!) notice, (II) informational,
& & & & (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[& & 14.013] (==) Log file: &/var/log/Xorg.0.log&, Time: Fri Mar 14 21:32:24 2014
[& & 14.014] (==) Using config file: &/etc/X11/xorg.conf&
[& & 14.014] (==) Using config directory: &/etc/X11/xorg.conf.d&
[& & 14.014] (==) Using system config directory &/usr/share/X11/xorg.conf.d&
[& & 14.024] (==) No Layout section.&&Using the first Screen section.
[& & 14.024] (**) |--&Screen &Default Screen& (0)
[& & 14.024] (**) |& &|--&Monitor &Configured Monitor&
[& & 14.024] (**) |& &|--&Device &Configured Video Device&
[& & 14.024] (==) Automatically adding devices
[& & 14.024] (==) Automatically enabling devices
[& & 14.024] (==) Automatically adding GPU devices
[& & 14.024] (WW) The directory &/usr/share/fonts/X11/cyrillic& does not exist.
[& & 14.024] & & & & Entry deleted from font path.
[& & 14.024] (WW) The directory &/usr/share/fonts/X11/100dpi/& does not exist.
[& & 14.024] & & & & Entry deleted from font path.
[& & 14.024] (WW) The directory &/usr/share/fonts/X11/75dpi/& does not exist.
[& & 14.024] & & & & Entry deleted from font path.
[& & 14.024] (WW) The directory &/usr/share/fonts/X11/100dpi& does not exist.
[& & 14.024] & & & & Entry deleted from font path.
[& & 14.024] (WW) The directory &/usr/share/fonts/X11/75dpi& does not exist.
[& & 14.024] & & & & Entry deleted from font path.
[& & 14.024] (WW) The directory &/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType& does not exist.
[& & 14.024] & & & & Entry deleted from font path.
[& & 14.024] (==) FontPath set to:
& & & & /usr/share/fonts/X11/misc,
& & & & /usr/share/fonts/X11/Type1,
& & & & built-ins
[& & 14.024] (==) ModulePath set to &/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules&
[& & 14.024] (II) The server relies on udev to provide the list of input devices.
& & & & If no devices become available, reconfigure udev or disable AutoAddDevices.
[& & 14.024] (II) Loader magic: 0xb771a6a0
[& & 14.024] (II) Module ABI versions:
[& & 14.024] & & & & X.Org ANSI C Emulation: 0.4
[& & 14.024] & & & & X.Org Video Driver: 13.1
[& & 14.024] & & & & X.Org XInput driver : 18.0
[& & 14.024] & & & & X.Org Server Extension : 7.0
[& & 14.025] (II) config/udev: Adding drm device (/dev/dri/card0)
[& & 14.026] (--) PCI:*(0:0:2:0) 5b:0d97 rev 9, Mem @ 0xc456, I/O @ 0x
[& & 14.026] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[& & 14.026] Initializing built-in extension Generic Event Extension
[& & 14.026] Initializing built-in extension SHAPE
[& & 14.026] Initializing built-in extension MIT-SHM
[& & 14.026] Initializing built-in extension XInputExtension
[& & 14.026] Initializing built-in extension XTEST
[& & 14.026] Initializing built-in extension BIG-REQUESTS
[& & 14.026] Initializing built-in extension SYNC
[& & 14.026] Initializing built-in extension XKEYBOARD
[& & 14.026] Initializing built-in extension XC-MISC
[& & 14.026] Initializing built-in extension SECURITY
[& & 14.026] Initializing built-in extension XINERAMA
[& & 14.026] Initializing built-in extension XFIXES
[& & 14.026] Initializing built-in extension RENDER
[& & 14.026] Initializing built-in extension RANDR
[& & 14.026] Initializing built-in extension COMPOSITE
[& & 14.026] Initializing built-in extension DAMAGE
[& & 14.026] Initializing built-in extension MIT-SCREEN-SAVER
[& & 14.026] Initializing built-in extension DOUBLE-BUFFER
[& & 14.026] Initializing built-in extension RECORD
[& & 14.026] Initializing built-in extension DPMS
[& & 14.026] Initializing built-in extension X-Resource
[& & 14.026] Initializing built-in extension XVideo
[& & 14.026] Initializing built-in extension XVideo-MotionCompensation
[& & 14.026] Initializing built-in extension SELinux
[& & 14.027] Initializing built-in extension XFree86-VidModeExtension
[& & 14.027] Initializing built-in extension XFree86-DGA
[& & 14.027] Initializing built-in extension XFree86-DRI
[& & 14.027] Initializing built-in extension DRI2
[& & 14.027] (II) LoadModule: &glx&
[& & 14.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[& & 14.030] (II) Module glx: vendor=&X.Org Foundation&
[& & 14.030] & & & & compiled for 1.13.3, module version = 1.0.0
[& & 14.030] & & & & ABI class: X.Org Server Extension, version 7.0
[& & 14.030] (==) AIGLX enabled
[& & 14.030] Loading extension GLX
[& & 14.030] (==) Matched intel as autoconfigured driver 0
[& & 14.030] (==) Matched intel as autoconfigured driver 1
[& & 14.030] (==) Matched vesa as autoconfigured driver 2
[& & 14.030] (==) Matched modesetting as autoconfigured driver 3
[& & 14.030] (==) Matched fbdev as autoconfigured driver 4
[& & 14.030] (==) Assigned the driver to the xf86ConfigLayout
[& & 14.030] (II) LoadModule: &intel&
[& & 14.031] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[& & 14.034] (II) Module intel: vendor=&X.Org Foundation&
[& & 14.034] & & & & compiled for 1.13.3, module version = 2.21.6
[& & 14.034] & & & & Module class: X.Org Video Driver
[& & 14.034] & & & & ABI class: X.Org Video Driver, version 13.1
[& & 14.034] (II) LoadModule: &vesa&
[& & 14.034] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[& & 14.035] (II) Module vesa: vendor=&X.Org Foundation&
[& & 14.035] & & & & compiled for 1.12.99.902, module version = 2.3.2
[& & 14.035] & & & & Module class: X.Org Video Driver
[& & 14.035] & & & & ABI class: X.Org Video Driver, version 13.0
[& & 14.035] (II) LoadModule: &modesetting&
[& & 14.036] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[& & 14.036] (II) Module modesetting: vendor=&X.Org Foundation&
[& & 14.036] & & & & compiled for 1.13.3, module version = 0.7.0
[& & 14.036] & & & & Module class: X.Org Video Driver
[& & 14.036] & & & & ABI class: X.Org Video Driver, version 13.1
[& & 14.036] (II) LoadModule: &fbdev&
[& & 14.036] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[& & 14.036] (II) Module fbdev: vendor=&X.Org Foundation&
[& & 14.036] & & & & compiled for 1.12.99.902, module version = 0.4.3
[& & 14.036] & & & & Module class: X.Org Video Driver
[& & 14.036] & & & & ABI class: X.Org Video Driver, version 13.0
[& & 14.036] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
& & & & i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
& & & & E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
& & & & 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
& & & & 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
& & & & Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
& & & & Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
& & & & Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
& & & & Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
& & & & Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
& & & & Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
& & & & Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
& & & & Haswell Mobile (GT3), HD Graphics, HD Graphics P,
& & & & Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
& & & & HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
& & & & Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
& & & & Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
& & & & Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
& & & & Haswell SDV Server (GT2), Haswell SDV Server (GT3),
& & & & Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
& & & & Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
& & & & Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
& & & & Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
& & & & HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
& & & & Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
& & & & Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
& & & & Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
& & & & Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
& & & & HD Graphics 4600, Iris(TM) Pro Graphics 5200,
& & & & Haswell CRW Server (GT1), Haswell CRW Server (GT2),
& & & & Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
& & & & Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
& & & & Iris(TM) Pro Graphics 5200, ValleyView PO board
[& & 14.038] (II) VESA: driver for VESA chipsets: vesa
[& & 14.038] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[& & 14.038] (II) FBDEV: driver for framebuffer: fbdev
[& & 14.038] (++) using VT number 7
[& & 14.038] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4.3 (Timo Aaltonen &&)
[& & 14.038] (WW) Falling back to old probe method for vesa
[& & 14.038] (WW) Falling back to old probe method for modesetting
[& & 14.038] (WW) Falling back to old probe method for fbdev
[& & 14.038] (II) Loading sub module &fbdevhw&
[& & 14.038] (II) LoadModule: &fbdevhw&
[& & 14.038] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[& & 14.039] (II) Module fbdevhw: vendor=&X.Org Foundation&
[& & 14.039] & & & & compiled for 1.13.3, module version = 0.0.2
[& & 14.039] & & & & ABI class: X.Org Video Driver, version 13.1
[& & 14.039] (II) intel(0): Creating default Display subsection in Screen section
& & & & &Default Screen& for depth/fbbpp 24/32
[& & 14.039] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[& & 14.039] (==) intel(0): RGB weight 888
[& & 14.039] (==) intel(0): Default visual is TrueColor
[& & 14.039] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[& & 14.039] (--) intel(0): CPU: sse2, sse3, ssse3, sse4.1, sse4.2, avx
[& & 14.039] (**) intel(0): Framebuffer tiled
[& & 14.039] (**) intel(0): Pixmaps tiled
[& & 14.039] (**) intel(0): &Tear free& disabled
[& & 14.040] (**) intel(0): Forcing per-crtc-pixmaps? no
[& & 14.040] (II) intel(0): Output LVDS1 using monitor section Configured Monitor
[& & 14.040] (**) intel(0): Option &PreferredMode& &.00&
[& & 14.040] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[& & 14.406] (II) intel(0): Output VGA1 has no monitor section
[& & 14.406] (II) intel(0): Output HDMI1 has no monitor section
[& & 14.406] (II) intel(0): Output DP1 has no monitor section
[& & 14.406] (II) intel(0): EDID for output LVDS1
[& & 14.407] (II) intel(0): Manufacturer: CMN&&Model: 1476&&Serial#: 0
[& & 14.407] (II) intel(0): Year: 2011&&Week: 49
[& & 14.407] (II) intel(0): EDID Version: 1.4
[& & 14.407] (II) intel(0): Digital Display Input
[& & 14.407] (II) intel(0): 6 bits per channel
[& & 14.407] (II) intel(0): Digital interface is undefined
[& & 14.407] (II) intel(0): Max Image Size [cm]: horiz.: 31&&vert.: 17
[& & 14.407] (II) intel(0): Gamma: 2.20
[& & 14.407] (II) intel(0): No DPMS capabilities specified
[& & 14.407] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[& & 14.407] (II) intel(0): First detailed timing is preferred mode
[& & 14.407] (II) intel(0): Preferred mode is native pixel format and refresh rate
[& & 14.407] (II) intel(0): redX: 0.590 redY: 0.342& &greenX: 0.330 greenY: 0.562
[& & 14.407] (II) intel(0): blueX: 0.160 blueY: 0.140& &whiteX: 0.313 whiteY: 0.329
[& & 14.407] (II) intel(0): Manufacturer's mask: 0
[& & 14.407] (II) intel(0): Supported detailed timing:
[& & 14.407] (II) intel(0): clock: 76.4 MHz& &Image Size:&&309 x 174 mm
[& & 14.407] (II) intel(0): h_active: 1366&&h_sync: 1434&&h_sync_end 1479 h_blank_end 1592 h_border: 0
[& & 14.407] (II) intel(0): v_active: 768&&v_sync: 772&&v_sync_end 779 v_blanking: 800 v_border: 0
[& & 14.407] (II) intel(0): Supported detailed timing:
[& & 14.407] (II) intel(0): clock: 51.0 MHz& &Image Size:&&309 x 174 mm
[& & 14.407] (II) intel(0): h_active: 1366&&h_sync: 1434&&h_sync_end 1479 h_blank_end 1592 h_border: 0
[& & 14.407] (II) intel(0): v_active: 768&&v_sync: 772&&v_sync_end 779 v_blanking: 800 v_border: 0
[& & 14.407] (II) intel(0): Unknown vendor-specific block 2
[& & 14.407] (II) intel(0): EDID (in hex):
[& & 14.407] (II) intel(0): & & & & 00ffffffffffff000dae
[& & 14.407] (II) intel(0): & & & & f
[& & 14.407] (II) intel(0): & & & &
[& & 14.407] (II) intel(0): & & & & da1d56ed
[& & 14.407] (II) intel(0): & & & & 0e
[& & 14.407] (II) intel(0): & & & & 442d000000
[& & 14.407] (II) intel(0): & & & &
[& & 14.407] (II) intel(0): & & & & 000c4cff0a3c640b0031
[& & 14.408] (II) intel(0): Not using mode &.00& (exceeds panel dimensions)
[& & 14.408] (II) intel(0): Not using default mode &320x240& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &400x300& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &400x300& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &512x384& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &640x480& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &640x512& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &800x600& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &896x672& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &928x696& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &960x720& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &576x432& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &680x384& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &680x384& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &700x525& (doublescan mode not supported)
[& & 14.408] (II) intel(0): Not using default mode &720x450& (doublescan mode not supported)
[& & 14.409] (II) intel(0): Not using default mode &800x512& (doublescan mode not supported)
[& & 14.409] (II) intel(0): Not using default mode &840x525& (doublescan mode not supported)
[& & 14.409] (II) intel(0): Not using default mode &840x525& (doublescan mode not supported)
[& & 14.409] (II) intel(0): Not using default mode &960x540& (doublescan mode not supported)
[& & 14.409] (II) intel(0): Not using default mode &960x600& (doublescan mode not supported)
[& & 14.409] (II) intel(0): Not using default mode && (doublescan mode not supported)
[& & 14.409] (II) intel(0): Printing probed modes for output LVDS1
[& & 14.409] (II) intel(0): Modeline &.0& &76.42&&79 2 779 800 +hsync -vsync (48.0 kHz eP)
[& & 14.409] (II) intel(0): Modeline &.0& &50.95&&79 2 779 800 +hsync -vsync (32.0 kHz e)
[& & 14.409] (II) intel(0): Modeline &.8& &84.75&&68 1 781 798 -hsync +vsync (47.7 kHz d)
[& & 14.409] (II) intel(0): Modeline &.0& &72.00&&40 1 781 790 +hsync -vsync (47.4 kHz d)
[& & 14.409] (II) intel(0): Modeline &.0& &65.00&&84 1 777 806 -hsync -vsync (48.4 kHz d)
[& & 14.409] (II) intel(0): Modeline &800x600&x60.3& &40.00&&800 840 968 1 605 628 +hsync +vsync (37.9 kHz d)
[& & 14.409] (II) intel(0): Modeline &800x600&x56.2& &36.00&&800 824 896 1 603 625 +hsync +vsync (35.2 kHz d)
[& & 14.409] (II) intel(0): Modeline &640x480&x59.9& &25.18&&640 656 752 800&&480 490 492 525 -hsync -vsync (31.5 kHz d)
[& & 14.440] (II) intel(0): EDID for output VGA1
[& & 14.440] (II) intel(0): EDID for output HDMI1
[& & 14.440] (II) intel(0): EDID for output DP1
[& & 14.440] (II) intel(0): Output LVDS1 connected
[& & 14.440] (II) intel(0): Output VGA1 disconnected
[& & 14.440] (II) intel(0): Output HDMI1 disconnected
[& & 14.440] (II) intel(0): Output DP1 disconnected
[& & 14.440] (II) intel(0): Using exact sizes for initial modes
[& & 14.440] (II) intel(0): Output LVDS1 using initial mode
[& & 14.440] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[& & 14.440] (==) intel(0): DPI set to (96, 96)
[& & 14.440] (II) Loading sub module &dri2&
[& & 14.440] (II) LoadModule: &dri2&
[& & 14.440] (II) Module &dri2& already built-in
[& & 14.440] (II) UnloadModule: &vesa&
[& & 14.440] (II) Unloading vesa
[& & 14.440] (II) UnloadModule: &modesetting&
[& & 14.440] (II) Unloading modesetting
[& & 14.440] (II) UnloadModule: &fbdev&
[& & 14.440] (II) Unloading fbdev
[& & 14.440] (II) UnloadSubModule: &fbdevhw&
[& & 14.440] (II) Unloading fbdevhw
[& & 14.440] (==) Depth 24 pixmap format is 32 bpp
[& & 14.441] (II) intel(0): SNA initialized with IvyBridge backend
[& & 14.441] (==) intel(0): Backing store disabled
[& & 14.441] (==) intel(0): Silken mouse enabled
[& & 14.441] (II) intel(0): HW Cursor enabled
[& & 14.441] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[& & 14.442] (==) intel(0): DPMS enabled
[& & 14.442] (II) intel(0): [DRI2] Setup complete
[& & 14.442] (II) intel(0): [DRI2]& &DRI driver: i965
[& & 14.442] (II) intel(0): direct rendering: DRI2 Enabled
[& & 14.442] (WW) intel(0): Option &PreferredMode& is not used
[& & 14.442] (==) intel(0): hotplug detection: &enabled&
[& & 14.442] (--) RandR disabled
[& & 14.451] (II) SELinux: Disabled on system
[& & 14.474] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[& & 14.474] (II) AIGLX: enabled GLX_INTEL_swap_event
[& & 14.474] (II) AIGLX: enabled GLX_ARB_create_context
[& & 14.474] (II) AIGLX: enabled GLX_ARB_create_context_profile
[& & 14.474] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[& & 14.474] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[& & 14.474] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[& & 14.474] (II) AIGLX: Loaded and initialized i965
[& & 14.474] (II) GLX: Initialized DRI2 GL provider for screen 0
[& & 14.475] (II) intel(0): switch to mode
on crtc 3 (pipe 0)
[& & 14.488] (II) intel(0): Setting screen physical size to 361 x 203
[& & 14.496] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7FE501AEF10E0D866E8E92.xkm
[& & 14.499] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[& & 14.499] (**) Power Button: Applying InputClass &evdev keyboard catchall&
[& & 14.499] (II) LoadModule: &evdev&
[& & 14.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[& & 14.500] (II) Module evdev: vendor=&X.Org Foundation&
[& & 14.500] & & & & compiled for 1.13.3, module version = 2.7.3
[& & 14.500] & & & & Module class: X.Org XInput Driver
[& & 14.500] & & & & ABI class: X.Org XInput driver, version 18.0
[& & 14.500] (II) Using input driver 'evdev' for 'Power Button'
[& & 14.500] (**) Power Button: always reports core events
[& & 14.500] (**) evdev: Power Button: Device: &/dev/input/event3&
[& & 14.500] (--) evdev: Power Button: Vendor 0 Product 0x1
[& & 14.501] (--) evdev: Power Button: Found keys
[& & 14.501] (II) evdev: Power Button: Configuring as keyboard
[& & 14.501] (**) Option &config_info& &udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3&
[& & 14.501] (II) XINPUT: Adding extended input device &Power Button& (type: KEYBOARD, id 6)
[& & 14.501] (**) Option &xkb_rules& &evdev&
[& & 14.501] (**) Option &xkb_model& &pc105&
[& & 14.501] (**) Option &xkb_layout& &cn&
[& & 14.504] (II) XKB: reuse xkmfile /var/lib/xkb/server-196B0DDCF5DB28BABBEBB3225CFF747.xkm
[& & 14.505] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[& & 14.505] (**) Video Bus: Applying InputClass &evdev keyboard catchall&
[& & 14.505] (II) Using input driver 'evdev' for 'Video Bus'
[& & 14.505] (**) Video Bus: always reports core events
[& & 14.505] (**) evdev: Video Bus: Device: &/dev/input/event5&
[& & 14.505] (--) evdev: Video Bus: Vendor 0 Product 0x6
[& & 14.505] (--) evdev: Video Bus: Found keys
[& & 14.505] (II) evdev: Video Bus: Configuring as keyboard
[& & 14.505] (**) Option &config_info& &udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5&
[& & 14.505] (II) XINPUT: Adding extended input device &Video Bus& (type: KEYBOARD, id 7)
[& & 14.505] (**) Option &xkb_rules& &evdev&
[& & 14.505] (**) Option &xkb_model& &pc105&
[& & 14.505] (**) Option &xkb_layout& &cn&
[& & 14.505] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[& & 14.505] (**) Power Button: Applying InputClass &evdev keyboard catchall&
[& & 14.505] (II) Using input driver 'evdev' for 'Power Button'
[& & 14.505] (**) Power Button: always reports core events
[& & 14.505] (**) evdev: Power Button: Device: &/dev/input/event1&
[& & 14.505] (--) evdev: Power Button: Vendor 0 Product 0x1
[& & 14.505] (--) evdev: Power Button: Found keys
[& & 14.505] (II) evdev: Power Button: Configuring as keyboard
[& & 14.505] (**) Option &config_info& &udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1&
[& & 14.505] (II) XINPUT: Adding extended input device &Power Button& (type: KEYBOARD, id 8)
[& & 14.505] (**) Option &xkb_rules& &evdev&
[& & 14.505] (**) Option &xkb_model& &pc105&
[& & 14.505] (**) Option &xkb_layout& &cn&
[& & 14.506] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[& & 14.506] (II) No input driver specified, ignoring this device.
[& & 14.506] (II) This device may have been added with another device file.
[& & 14.506] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[& & 14.506] (**) Sleep Button: Applying InputClass &evdev keyboard catchall&
[& & 14.506] (II) Using input driver 'evdev' for 'Sleep Button'
[& & 14.506] (**) Sleep Button: always reports core events
[& & 14.506] (**) evdev: Sleep Button: Device: &/dev/input/event2&
[& & 14.506] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[& & 14.506] (--) evdev: Sleep Button: Found keys
[& & 14.506] (II) evdev: Sleep Button: Configuring as keyboard
[& & 14.506] (**) Option &config_info& &udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2&
[& & 14.506] (II) XINPUT: Adding extended input device &Sleep Button& (type: KEYBOARD, id 9)
[& & 14.506] (**) Option &xkb_rules& &evdev&
[& & 14.506] (**) Option &xkb_model& &pc105&
[& & 14.506] (**) Option &xkb_layout& &cn&
[& & 14.507] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0:00:02.0/drm/card0
[& & 14.507] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[& & 14.507] (II) config/udev: Adding input device Camera module (/dev/input/event6)
[& & 14.507] (**) Camera module: Applying InputClass &evdev keyboard catchall&
[& & 14.507] (II) Using input driver 'evdev' for 'Camera module'
[& & 14.507] (**) Camera module: always reports core events
[& & 14.507] (**) evdev: Camera module: Device: &/dev/input/event6&
[& & 14.507] (--) evdev: Camera module: Vendor 0x5986 Product 0x523
[& & 14.507] (--) evdev: Camera module: Found keys
[& & 14.507] (II) evdev: Camera module: Configuring as keyboard
[& & 14.507] (**) Option &config_info& &udev:/sys/devices/pci0:00:14.0/usb3/3-3/3-3:1.0/input/input8/event6&
[& & 14.507] (II) XINPUT: Adding extended input device &Camera module& (type: KEYBOARD, id 10)
[& & 14.507] (**) Option &xkb_rules& &evdev&
[& & 14.507] (**) Option &xkb_model& &pc105&
[& & 14.507] (**) Option &xkb_layout& &cn&
[& & 14.508] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[& & 14.508] (II) No input driver specified, ignoring this device.
[& & 14.508] (II) This device may have been added with another device file.
[& & 14.508] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[& & 14.508] (II) No input driver specified, ignoring this device.
[& & 14.508] (II) This device may have been added with another device file.
[& & 14.508] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[& & 14.508] (II) No input driver specified, ignoring this device.
[& & 14.508] (II) This device may have been added with another device file.
[& & 14.508] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[& & 14.508] (**) AT Translated Set 2 keyboard: Applying InputClass &evdev keyboard catchall&
[& & 14.508] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[& & 14.508] (**) AT Translated Set 2 keyboard: always reports core events
[& & 14.508] (**) evdev: AT Translated Set 2 keyboard: Device: &/dev/input/event4&
[& & 14.508] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[& & 14.508] (--) evdev: AT Translated Set 2 keyboard: Found keys
[& & 14.508] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[& & 14.508] (**) Option &config_info& &udev:/sys/devices/platform/i8042/serio0/input/input4/event4&
[& & 14.508] (II) XINPUT: Adding extended input device &AT Translated Set 2 keyboard& (type: KEYBOARD, id 11)
[& & 14.508] (**) Option &xkb_rules& &evdev&
[& & 14.508] (**) Option &xkb_model& &pc105&
[& & 14.508] (**) Option &xkb_layout& &cn&
[& & 14.509] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[& & 14.509] (**) SynPS/2 Synaptics TouchPad: Applying InputClass &evdev touchpad catchall&
[& & 14.509] (**) SynPS/2 Synaptics TouchPad: Applying InputClass &Multitouch Touchpad&
[& & 14.509] (**) SynPS/2 Synaptics TouchPad: Applying InputClass &touchpad catchall&
[& & 14.509] (**) SynPS/2 Synaptics TouchPad: Applying InputClass &Default clickpad buttons&
[& & 14.509] (**) SynPS/2 Synaptics TouchPad: Applying InputClass &touchpad&
[& & 14.509] (II) LoadModule: &synaptics&
[& & 14.509] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[& & 14.509] (II) Module synaptics: vendor=&X.Org Foundation&
[& & 14.509] & & & & compiled for 1.13.1.901, module version = 1.6.2
[& & 14.509] & & & & Module class: X.Org XInput Driver
[& & 14.509] & & & & ABI class: X.Org XInput driver, version 18.0
[& & 14.509] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[& & 14.509] (**) SynPS/2 Synaptics TouchPad: always reports core events
[& & 14.509] (**) Option &Device& &/dev/input/event10&
[& & 14.632] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4708
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[& & 14.632] (**) Option &VertEdgeScroll& &on&
[& & 14.632] (**) Option &HorizEdgeScroll& &on&
[& & 14.632] (**) Option &VertTwoFingerScroll& &on&
[& & 14.632] (**) Option &HorizTwoFingerScroll& &on&
[& & 14.632] (**) Option &CircularScrolling& &off&
[& & 14.632] (**) Option &SoftButtonAreas& &50% 0 82% 0 0 0 0 0&
[& & 14.632] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[& & 14.632] (**) SynPS/2 Synaptics TouchPad: always reports core events
[& & 14.664] (**) Option &config_info& &udev:/sys/devices/platform/i8042/serio1/input/input7/event10&
[& & 14.664] (II) XINPUT: Adding extended input device &SynPS/2 Synaptics TouchPad& (type: TOUCHPAD, id 12)
[& & 14.664] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[& & 14.664] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[& & 14.664] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[& & 14.664] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[& & 14.664] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[& & 14.664] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[& & 14.664] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[& & 14.664] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[& & 14.665] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[& & 14.665] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass &touchpad ignore duplicates&
[& & 15.254] (II) intel(0): EDID vendor &CMN&, prod id 5238
[& & 15.254] (II) intel(0): Printing DDC gathered Modelines:
[& & 15.254] (II) intel(0): Modeline &.0& &76.42&&79 2 779 800 +hsync -vsync (48.0 kHz eP)
[& & 15.254] (II) intel(0): Modeline &.0& &50.95&&79 2 779 800 +hsync -vsync (32.0 kHz e)
[& & 16.096] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7FE501AEF10E0D866E8E92.xkm
[& & 16.263] (II) intel(0): EDID vendor &CMN&, prod id 5238
[& & 16.263] (II) intel(0): Printing DDC gathered Modelines:
[& & 16.263] (II) intel(0): Modeline &.0& &76.42&&79 2 779 800 +hsync -vsync (48.0 kHz eP)
[& & 16.263] (II) intel(0): Modeline &.0& &50.95&&79 2 779 800 +hsync -vsync (32.0 kHz e)
[& & 16.297] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7FE501AEF10E0D866E8E92.xkm
[& & 16.307] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7FE501AEF10E0D866E8E92.xkm
[& & 16.316] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7FE501AEF10E0D866E8E92.xkm
[& & 16.320] (II) intel(0): EDID vendor &CMN&, prod id 5238
[& & 16.320] (II) intel(0): Printing DDC gathered Modelines:
[& & 16.321] (II) intel(0): Modeline &.0& &76.42&&79 2 779 800 +hsync -vsync (48.0 kHz eP)
[& & 16.321] (II) intel(0): Modeline &.0& &50.95&&79 2 779 800 +hsync -vsync (32.0 kHz e)
[& & 18.141] (II) intel(0): EDID vendor &CMN&, prod id 5238
[& & 18.141] (II) intel(0): Printing DDC gathered Modelines:
[& & 18.141] (II) intel(0): Modeline &.0& &76.42&&79 2 779 800 +hsync -vsync (48.0 kHz eP)
[& & 18.141] (II) intel(0): Modeline &.0& &50.95&&79 2 779 800 +hsync -vsync (32.0 kHz e)
[& & 40.843] (II) config/udev: Adding input device MLK RAPOO 1800 (/dev/input/mouse1)
[& & 40.843] (II) No input driver specified, ignoring this device.
[& & 40.843] (II) This device may have been added with another device file.
[& & 40.844] (II) config/udev: Adding input device MLK RAPOO 1800 (/dev/input/event12)
[& & 40.844] (**) MLK RAPOO 1800: Applying InputClass &evdev pointer catchall&
[& & 40.844] (**) MLK RAPOO 1800: Applying InputClass &evdev keyboard catchall&
[& & 40.844] (II) Using input driver 'evdev' for 'MLK RAPOO 1800'
[& & 40.844] (**) MLK RAPOO 1800: always reports core events
[& & 40.844] (**) evdev: MLK RAPOO 1800: Device: &/dev/input/event12&
[& & 40.844] (--) evdev: MLK RAPOO 1800: Vendor 0x1bcf Product 0x5c2
[& & 40.844] (--) evdev: MLK RAPOO 1800: Found 9 mouse buttons
[& & 40.844] (--) evdev: MLK RAPOO 1800: Found scroll wheel(s)
[& & 40.844] (--) evdev: MLK RAPOO 1800: Found relative axes
[& & 40.844] (--) evdev: MLK RAPOO 1800: Found x and y relative axes
[& & 40.844] (--) evdev: MLK RAPOO 1800: Found absolute axes
[& & 40.844] (II) evdev: MLK RAPOO 1800: Forcing absolute x/y axes to exist.
[& & 40.844] (--) evdev: MLK RAPOO 1800: Found keys
[& & 40.844] (II) evdev: MLK RAPOO 1800: Configuring as mouse
[& & 40.844] (II) evdev: MLK RAPOO 1800: Configuring as keyboard
[& & 40.844] (II) evdev: MLK RAPOO 1800: Adding scrollwheel support
[& & 40.844] (**) evdev: MLK RAPOO 1800: YAxisMapping: buttons 4 and 5
[& & 40.844] (**) evdev: MLK RAPOO 1800: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[& & 40.844] (**) Option &config_info& &udev:/sys/devices/pci0:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input13/event12&
[& & 40.844] (II) XINPUT: Adding extended input device &MLK RAPOO 1800& (type: KEYBOARD, id 13)
[& & 40.844] (**) Option &xkb_rules& &evdev&
[& & 40.844] (**) Option &xkb_model& &pc105&
[& & 40.845] (**) Option &xkb_layout& &cn&
[& & 40.845] (II) evdev: MLK RAPOO 1800: initialized for relative axes.
[& & 40.845] (WW) evdev: MLK RAPOO 1800: ignoring absolute axes.
[& & 40.845] (**) MLK RAPOO 1800: (accel) keeping acceleration scheme 1
[& & 40.845] (**) MLK RAPOO 1800: (accel) acceleration profile 0
[& & 40.845] (**) MLK RAPOO 1800: (accel) acceleration factor: 2.000
[& & 40.845] (**) MLK RAPOO 1800: (accel) acceleration threshold: 4
[& & 40.846] (II) config/udev: Adding input device MLK RAPOO 1800 (/dev/input/event11)
[& & 40.846] (**) MLK RAPOO 1800: Applying InputClass &evdev keyboard catchall&
[& & 40.846] (II) Using input driver 'evdev' for 'MLK RAPOO 1800'
[& & 40.846] (**) MLK RAPOO 1800: always reports core events
[& & 40.846] (**) evdev: MLK RAPOO 1800: Device: &/dev/input/event11&
[& & 40.846] (--) evdev: MLK RAPOO 1800: Vendor 0x1bcf Product 0x5c2
[& & 40.846] (--) evdev: MLK RAPOO 1800: Found keys
[& & 40.846] (II) evdev: MLK RAPOO 1800: Configuring as keyboard
[& & 40.846] (**) Option &config_info& &udev:/sys/devices/pci0:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event11&
[& & 40.846] (II) XINPUT: Adding extended input device &MLK RAPOO 1800& (type: KEYBOARD, id 14)
[& & 40.846] (**) Option &xkb_rules& &evdev&
[& & 40.846] (**) Option &xkb_model& &pc105&
[& & 40.846] (**) Option &xkb_layout& &cn&
[& & 40.855] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7FE501AEF10E0D866E8E92.xkm
初级工程师
引用:原帖由 what250 于
08:54 发表
其它版本的linux呢？试过没。 试过ubuntu13.10,deepin。redhat
初级工程师
别沉了啊各位大侠
高级工程师
(WW) warning, (EE) error, (NI) not implemented, (??) unknown
你能过滤下吗，只需要贴出ww和ee开头部分
菜鸟飘过，跟着学习一下！
初级工程师
引用:原帖由 chengchow 于
14:29 发表
(WW) warning, (EE) error, (NI) not implemented, (??) unknown
你能过滤下吗，只需要贴出ww和ee开头部分 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[& & 13.166] (WW) The directory &/usr/share/fonts/X11/cyrillic& does not exist.
[& & 13.166] & & & & Entry deleted from font path.
[& & 13.166] (WW) The directory &/usr/share/fonts/X11/100dpi/& does not exist.
[& & 13.166] & & & & Entry deleted from font path.
[& & 13.166] (WW) The directory &/usr/share/fonts/X11/75dpi/& does not exist.
[& & 13.166] & & & & Entry deleted from font path.
[& & 13.166] (WW) The directory &/usr/share/fonts/X11/100dpi& does not exist.
[& & 13.166] & & & & Entry deleted from font path.
[& & 13.166] (WW) The directory &/usr/share/fonts/X11/75dpi& does not exist.
[& & 13.166] & & & & Entry deleted from font path.
[& & 13.166] (WW) The directory &/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType& does not exist.
[& & 13.166] & & & & Entry deleted from font path.
[& & 13.174] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4.3 (Timo Aaltonen &&)
[& & 13.175] (WW) Falling back to old probe method for vesa
[& & 13.175] (WW) Falling back to old probe method for modesetting
[& & 13.175] (WW) Falling back to old probe method for fbdev
[& & 13.242] (WW) intel(0): Option &PreferredMode& is not used
[& & 13.320] (WW) evdev: MLK RAPOO 1800: ignoring absolute axes.
就这些，没有EE开头的错误信息}