处女求助贴：请大虾帮我配置xorg.conf文件，3Q - 查看主题 & Ubuntu中文论坛
&[ 8 篇帖子 ]&
&文章标题 : 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
9:38帖子: 63
送出感谢: 0 次
接收感谢: 0 次
初学Ubuntu，这个问题搞了我3个不眠夜，实在无法解决，特来求助，请大虾们帮助一下，3Q！ Ubuntu 9.04，Intel G33主板，22寸山寨杂牌LCD，现在分辨率最高只能去到，而我的显示器应该是的。注：我已经更新了Linux 2.6.30内核，2.7.1版本驱动。曾经给Section &Screen&指定Modes &&但是启动会出错。现在启动后，先黑屏有个正常的小鼠标箭头(我怀疑这时候分辨率是正常的)，约3秒后屏幕跳一下，变成了较大的鼠标箭头，然后出桌面，此时分辨率只有.请有经验的大哥帮我修改一下xorg.conf文件：Section &Device&Driver &intel&Identifier &Configured Video Device&Option &AccelMethod& &uxa&EndSectionSection &Monitor&Identifier &LCD&HorizSync 30-83VertRefresh 56-76Option &DPMS&EndSectionSection &Screen&Identifier &LCD&Monitor &Configured Monitor&Device &intel&EndSection
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
9:54帖子: 374
送出感谢: 0 次
接收感谢: 0 次
处女求助贴_______________________楼主，你这个标题真是能让人想入非非。。。
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
3:09帖子: 5770
送出感谢: 0 次
删了开hal装xf86-input-evdev，让它自己认吧...
_________________HUNT Unfortunately No Talent...
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
9:38帖子: 63
送出感谢: 0 次
接收感谢: 0 次
HuntXu 写道:删了开hal装xf86-input-evdev，让它自己认吧...开hal是什么？请教怎么删？我试过这样的配置也不行：Section &Device&
&intel& Identifier &Configured Video Device&
&AccelMethod& &uxa&EndSectionSection &Monitor& Identifier &LCD&
VertRefresh
&DPMS&EndSectionSection &Screen& Identifier &LCD& Device
&intel& Monitor
&Generic Monitor& DefaultDepth 24SubSection &Display&
&& && && &&
EndSubSectionSubSection &Display&
&& && && &&
EndSubSectionSubSection &Display&
&& && && &&
EndSubSectionSubSection &Display&
&& && && &&
EndSubSectionSubSection &Display&
&& && && &&
EndSubSectionSubSection &Display&
&& && && &&
EndSubSectionEndSection
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
20:52帖子: 1471
估计是30-83 56-76这两个参数不对，液晶没用过，山寨的找说明书来好好看参数吧
_________________missing is i missing you...
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
9:38帖子: 63
送出感谢: 0 次
接收感谢: 0 次
山寨LCD的意思是，连纸盒子都是通用的，根本没有说明书。其实网上查很多人出现我遇到的问题，不管是什么名牌显示器。
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
20:52帖子: 1471
那应该有解决办法的啊，那么多人有这个毛病，慢慢找改参数吧很难帮到你(*^_^*)
_________________missing is i missing you...
&文章标题 : Re: 处女求助贴：请大虾帮我配置xorg.conf文件，3Q发表于 :
9:38帖子: 63
送出感谢: 0 次
接收感谢: 0 次
不知道错在哪里：dmesg[
0.000000] Initializing cgroup subsys cpuset[
0.000000] Initializing cgroup subsys cpu[
0.000000] Linux version 2.6.30--generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) # SMP Wed Apr 22 13:34:16 UTC 2009[
0.000000] Command line: root=UUID=eb11a8db-5c79-4aff-894c-ef8a430ef5f8 ro locale=zh_CN quiet splash [
0.000000] KERNEL supported cpus:[
Intel GenuineIntel[
AMD AuthenticAMD[
Centaur CentaurHauls[
0.000000] BIOS-provided physical RAM map:[
BIOS-e820: 0000 - fc00 (usable)[
BIOS-e820: fc00 - a0000 (reserved)[
BIOS-e820: e4000 - 0000 (reserved)[
BIOS-e820: 0000 - 0000 (usable)[
BIOS-e820: 0000 - e000 (ACPI data)[
BIOS-e820: e000 - e0000 (ACPI NVS)[
BIOS-e820: e0000 - 0000 (reserved)[
BIOS-e820: fee00000 - fee01000 (reserved)[
BIOS-e820: fff00000 - 0000 (reserved)[
BIOS-e820: 0000 - 0000 (usable)[
0.000000] DMI 2.4 present.[
0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.[
0.000000] e820 update range: 0000 - 0000 (usable) ==& (reserved)[
0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x[
0.000000] MTRR default type: uncachable[
0.000000] MTRR fixed ranges enabled:[
00000-9FFFF write-back[
A0000-BFFFF uncachable[
C0000-DFFFF write-protect[
E0000-EFFFF write-through[
F0000-FFFFF write-protect[
0.000000] MTRR variable ranges enabled:[
0 base 0D0000000 mask FF0000000 uncachable[
1 base 0E0000000 mask FE0000000 uncachable[
mask F write-back[
mask F write-back[
mask FE0000000 write-back[
5 base 1A0000000 mask FF0000000 write-back[
6 base 0CF700000 mask FFFF00000 uncachable[
7 disabled[
0.000000] e820 update range: 0000 - 0000 (usable) ==& (reserved)[
0.000000] e820 update range: 0000 - 0000 (usable) ==& (reserved)[
0.000000] last_pfn = 0xcf680 max_arch_pfn = 0x[
0.000000] Scanning 0 areas for low memory corruption[
0.000000] modified physical RAM map:[
modified: 0000 - 0000 (reserved)[
modified: 0000 - fc00 (usable)[
modified: fc00 - a0000 (reserved)[
modified: e4000 - 0000 (reserved)[
modified: 0000 - 0000 (usable)[
modified: 0000 - e000 (ACPI data)[
modified: e000 - e0000 (ACPI NVS)[
modified: e0000 - 0000 (reserved)[
modified: fee00000 - fee01000 (reserved)[
modified: fff00000 - 0000 (reserved)[
modified: 0000 - 0000 (usable)[
0.000000] init_memory_mapping: 0cf680000[
- 00cf600000 page 2M[
00cf600000 - 00cf680000 page 4k[
0.000000] kernel direct mapping tables up to cf680000 @ [
0.000000] init_memory_mapping: 1b0000000[
- 01b0000000 page 2M[
0.000000] kernel direct mapping tables up to 1b0000000 @ [
0.000000] RAMDISK:
- 37fef98e[
0.000000] ACPI: RSDP fb6e0 00014 (v00 ACPIAM)[
0.000000] ACPI: RSDT
(v01 A_M_I_ OEMRSDT
0.000000] ACPI: FACP
(v02 A_M_I_ OEMFACP
0.000000] ACPI: DSDT 05c0 0884B (v01
0.000000] ACPI: FACS e000 00040[
0.000000] ACPI: APIC C (v01 A_M_I_ OEMAPIC
0.000000] ACPI: MCFG C (v01 A_M_I_ OEMMCFG
0.000000] ACPI: OEMB e040 00081 (v01 A_M_I_ AMI_OEM
0.000000] ACPI: HPET 8e10 00038 (v01 A_M_I_ OEMHPET
0.000000] ACPI: GSCI e0d0 02024 (v01 A_M_I_ GMCHSCI
0.000000] ACPI: OSFR 8e50 000B0 (v01 A_M_I_ OEMOSFR
0.000000] ACPI: Local APIC address 0xfee00000[
0.000000] (8 early reservations) ==& bootmem [ - 01b0000000][
BIOS data page ==& [ - ][
TRAMPOLINE ==& [ - ][
TEXT DATA BSS ==& [ - ][
#3 [ - 0037fef98e]
RAMDISK ==& [ - 0037fef98e][
BIOS reserved ==& [ - ][
BRK ==& [ - ][
PGTABLE ==& [ - ][
PGTABLE ==& [ - ][
0.000000] found SMP MP-table at [ffff0] ff780[
[ffffe-ffffe20005ffffff] PMD -& [ffff-ffff88002e1fffff] on node 0[
0.000000] Zone PFN ranges:[
0x -& 0x001b0000[
0.000000] Movable zone start PFN for each node[
0.000000] early_node_map[3] active PFN ranges[
0: 0x -& 0x0000009f[
0: 0x -& 0x000cf680[
0: 0x -& 0x001b0000[
0.000000] On node 0 totalpages: 1570319[
DMA zone: 56 pages used for memmap[
DMA zone: 2641 pages reserved[
DMA zone: 1286 pages, LIFO batch:0[
DMA32 zone: 14280 pages used for memmap[
DMA32 zone: 831160 pages, LIFO batch:31[
Normal zone: 9856 pages used for memmap[
Normal zone: 711040 pages, LIFO batch:31[
0.000000] ACPI: PM-Timer IO Port: 0x808[
0.000000] ACPI: Local APIC address 0xfee00000[
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)[
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)[
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)[
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)[
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[
0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23[
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)[
0.000000] ACPI: IRQ0 used by override.[
0.000000] ACPI: IRQ2 used by override.[
0.000000] ACPI: IRQ9 used by override.[
0.000000] Using ACPI (MADT) for SMP configuration information[
0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000[
0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs[
0.000000] nr_irqs_gsi: 24[
0.000000] PM: Registered nosave memory: f000 - a0000[
0.000000] PM: Registered nosave memory: a0000 - e4000[
0.000000] PM: Registered nosave memory: e4000 - 0000[
0.000000] PM: Registered nosave memory: 0000 - e000[
0.000000] PM: Registered nosave memory: e000 - e0000[
0.000000] PM: Registered nosave memory: e0000 - 0000[
0.000000] PM: Registered nosave memory: 0000 - fee00000[
0.000000] PM: Registered nosave memory: fee00000 - fee01000[
0.000000] PM: Registered nosave memory: fee01000 - fff00000[
0.000000] PM: Registered nosave memory: fff00000 - 0000[
0.000000] Allocating PCI resources starting at d0000000 (gap: cff700000)[
0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1[
0.000000] PERCPU: Embedded 27 pages at ffff, static data 79968 bytes[
0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1543486[
0.000000] Kernel command line: root=UUID=eb10a8db-5c69-4aff-854c-ef8a430ef5f8 ro locale=zh_CN quiet splash [
0.000000] Initializing CPU#0[
0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240[
0.000000] NR_IRQS:2304[
0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)[
0.000000] Fast TSC calibration using PIT[
0.000000] Detected
MHz processor.[
0.004000] Console: colour VGA+ 80x25[
0.004000] console [tty0] enabled[
0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)[
0.004000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)[
0.004000] allocated
bytes of page_cgroup[
0.004000] please try cgroup_disable=memory option if you don't want[
0.004000] Checking aperture...[
0.004000] No AGP bridge found[
0.004000] Calgary: detecting Calgary via BIOS EBDA area[
0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing![
0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)[
0.004000] Placing 64MB software IO TLB between ffff - ffff[
0.004000] software IO TLB at phys 0x - 0x[
0.004000] Memory: 77888k available (4796k kernel code, 796612k absent, 264364k reserved, 2632k data, 568k init)[
0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[
0.004000] hpet clockevent registered[
0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer[
0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6299.58 BogoMIPS (lpj=)[
0.004000] Security Framework initialized[
0.004000] SELinux:
Disabled at boot.[
0.004000] Mount-cache hash table entries: 256[
0.004000] Initializing cgroup subsys ns[
0.004000] Initializing cgroup subsys cpuacct[
0.004000] Initializing cgroup subsys memory[
0.004000] Initializing cgroup subsys freezer[
0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K[
0.004000] CPU: L2 cache: 2048K[
0.004000] CPU: Physical Processor ID: 0[
0.004000] CPU: Processor Core ID: 0[
0.004000] using mwait in idle threads.[
0.004000] ACPI: Core revision [
0.012044] Setting APIC routing to flat[
0.012495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[
0.054176] CPU0: Intel Pentium(R) Dual-Core
@ 2.80GHz stepping 0a[
0.056001] Booting processor 1 APIC 0x1 ip 0x6000[
0.004000] Initializing CPU#1[
0.004000] Calibrating delay using timer specific routine.. 6299.88 BogoMIPS (lpj=)[
0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K[
0.004000] CPU: L2 cache: 2048K[
0.004000] CPU: Physical Processor ID: 0[
0.004000] CPU: Processor Core ID: 1[
0.140471] CPU1: Intel Pentium(R) Dual-Core
@ 2.80GHz stepping 0a[
0.140489] checking TSC synchronization [CPU#0 -& CPU#1]: passed.[
0.144097] Brought up 2 CPUs[
0.144100] Total of 2 processors activated (12599.46 BogoMIPS).[
0.144142] CPU0 attaching sched-domain:[
domain 0: span 0-1 level MC[
groups: 0 1[
0.144150] CPU1 attaching sched-domain:[
domain 0: span 0-1 level MC[
groups: 1 0[
0.144209] net_namespace: 1888 bytes[
0.144209] Booting paravirtualized kernel on bare hardware[
0.144209] regulator: core version 0.5[
0.144209] Time:
Date: 07/16/09[
0.144209] NET: Registered protocol family 16[
0.144209] ACPI: bus type pci registered[
0.144209] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255[
0.144209] PCI: Not using MMCONFIG.[
0.144209] PCI: Using configuration type 1 for base access[
0.144652] bio: create slab &bio-0& at 0[
0.144663] ACPI: EC: Look up EC in DSDT[
0.154649] ACPI: Interpreter enabled[
0.154652] ACPI: (supports S0 S1 S3 S4 S5)[
0.154665] ACPI: Using IOAPIC for interrupt routing[
0.154708] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255[
0.157581] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources[
0.159015] PCI: Using MMCONFIG at e0000000 - efffffff[
0.166517] ACPI: No dock devices found.[
0.166568] ACPI: PCI Root Bridge [PCI0] (0000:00)[
0.166626] pci .0: reg 10 32bit mmio: [0xfexfe97ffff][
0.166629] pci .0: reg 14 io port: [0xbc00-0xbc07][
0.166632] pci .0: reg 18 32bit mmio: [0xdxdfffffff][
0.166635] pci .0: reg 1c 32bit mmio: [0xfexfe8fffff][
0.166659] pci .1: reg 10 32bit mmio: [0xfexfe9fffff][
0.166729] pci a.0: reg 20 io port: [0xb480-0xb49f][
0.166782] pci a.1: reg 20 io port: [0xb800-0xb81f][
0.166835] pci a.2: reg 20 io port: [0xb880-0xb89f][
0.166892] pci a.7: reg 10 32bit mmio: [0xfe7fbc00-0xfe7fbfff][
0.166936] pci a.7: PME# supported from D0 D3hot D3cold[
0.166939] pci a.7: PME# disabled[
0.166970] pci b.0: reg 10 64bit mmio: [0xfe7f4000-0xfe7f7fff][
0.167002] pci b.0: PME# supported from D0 D3hot D3cold[
0.167004] pci b.0: PME# disabled[
0.167047] pci c.0: PME# supported from D0 D3hot D3cold[
0.167050] pci c.0: PME# disabled[
0.167095] pci c.4: PME# supported from D0 D3hot D3cold[
0.167098] pci c.4: PME# disabled[
0.167141] pci c.5: PME# supported from D0 D3hot D3cold[
0.167144] pci c.5: PME# disabled[
0.167185] pci d.0: reg 20 io port: [0xb000-0xb01f][
0.167238] pci d.1: reg 20 io port: [0xb080-0xb09f][
0.167291] pci d.2: reg 20 io port: [0xb400-0xb41f][
0.167348] pci d.7: reg 10 32bit mmio: [0xfe7fb800-0xfe7fbbff][
0.167392] pci d.7: PME# supported from D0 D3hot D3cold[
0.167395] pci d.7: PME# disabled[
0.167491] pci f.0: quirk: region f claimed by ICH6 ACPI/GPIO/TCO[
0.167494] pci f.0: quirk: region 0480-04bf claimed by ICH6 GPIO[
0.167496] pci f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)[
0.167539] pci f.2: reg 10 io port: [0x9c00-0x9c07][
0.167544] pci f.2: reg 14 io port: [0x3][
0.167548] pci f.2: reg 18 io port: [0x7][
0.167552] pci f.2: reg 1c io port: [0x3][
0.167556] pci f.2: reg 20 io port: [0xf][
0.167560] pci f.2: reg 24 io port: [0xf][
0.167595] pci f.3: reg 10 64bit mmio: [0xfe7fb400-0xfe7fb4ff][
0.167605] pci f.3: reg 20 io port: [0x400-0x41f][
0.167638] pci f.5: reg 10 io port: [0xac00-0xac07][
0.167642] pci f.5: reg 14 io port: [0xa880-0xa883][
0.167646] pci f.5: reg 18 io port: [0xa800-0xa807][
0.167650] pci f.5: reg 1c io port: [0xa480-0xa483][
0.167654] pci f.5: reg 20 io port: [0xa400-0xa40f][
0.167658] pci f.5: reg 24 io port: [0xa080-0xa08f][
0.167715] pci c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff][
0.167763] pci .0: reg 10 io port: [0xdc00-0xdc07][
0.167771] pci .0: reg 14 io port: [0xd880-0xd883][
0.167778] pci .0: reg 18 io port: [0xd800-0xd807][
0.167786] pci .0: reg 1c io port: [0xd480-0xd483][
0.167793] pci .0: reg 20 io port: [0xd400-0xd40f][
0.167869] pci c.4: bridge io port: [0xd000-0xdfff][
0.167922] pci .0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff][
0.167929] pci .0: reg 18 io port: [0xc800-0xc8ff][
0.167951] pci .0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff][
0.167985] pci .0: supports D1 D2[
0.167986] pci .0: PME# supported from D0 D1 D2 D3hot D3cold[
0.167990] pci .0: PME# disabled[
0.168027] pci c.5: bridge io port: [0xc000-0xcfff][
0.168029] pci c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff][
0.168062] pci .0: reg 10 32bit mmio: [0xfebff800-0xfebfffff][
0.168068] pci .0: reg 14 io port: [0xec00-0xec7f][
0.168103] pci .0: PME# supported from D0 D3hot D3cold[
0.168107] pci .0: PME# disabled[
0.168142] pci e.0: transparent bridge[
0.168145] pci e.0: bridge io port: [0xe000-0xefff][
0.168148] pci e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff][
0.168164] pci_bus 0000:00: on NUMA node 0[
0.168168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][
0.168268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT][
0.168338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT][
0.168383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT][
0.168437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT][
0.182994] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)[
0.183095] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)[
0.183193] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)[
0.183293] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)[
0.183392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15)[
0.183490] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)[
0.183588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)[
0.183687] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)[
0.183800] SCSI subsystem initialized[
0.183826] libata version 3.00 loaded.[
0.183826] usbcore: registered new interface driver usbfs[
0.183826] usbcore: registered new interface driver hub[
0.183826] usbcore: registered new device driver usb[
0.184016] ACPI: WMI: Mapper loaded[
0.184017] PCI: Using ACPI for IRQ routing[
0.196008] Bluetooth: Core ver 2.15[
0.196024] NET: Registered protocol family 31[
0.196024] Bluetooth: HCI device and connection manager initialized[
0.196024] Bluetooth: HCI socket layer initialized[
0.196024] NET: Registered protocol family 8[
0.196026] NET: Registered protocol family 20[
0.196037] NetLabel: Initializing[
0.196039] NetLabel:
domain hash size = 128[
0.196041] NetLabel:
protocols = UNLABELED CIPSOv4[
0.196055] NetLabel:
unlabeled traffic allowed by default[
0.196098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0[
0.196108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter[
0.212010] pnp: PnP ACPI init[
0.212019] ACPI: bus type pnp registered[
0.214448] pnp: PnP ACPI: found 13 devices[
0.214449] ACPI: ACPI bus type pnp unregistered[
0.214456] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved[
0.214461] system 00:06: ioport range 0x290-0x297 has been reserved[
0.214465] system 00:07: ioport range 0x4d0-0x4d1 has been reserved[
0.214467] system 00:07: ioport range 0x800-0x87f has been reserved[
0.214469] system 00:07: ioport range 0x480-0x4bf has been reserved[
0.214471] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved[
0.214473] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved[
0.214475] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved[
0.214477] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved[
0.214479] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved[
0.214483] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved[
0.214484] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved[
0.214488] system 00:0b: iomem range 0xexefffffff has been reserved[
0.214492] system 00:0c: iomem range 0x0-0x9ffff could not be reserved[
0.214494] system 00:0c: iomem range 0xc0000-0xcffff has been reserved[
0.214496] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved[
0.214498] system 00:0c: iomem range 0xxcf6fffff could not be reserved[
0.219087] pci c.0: PCI bridge, secondary bus 0000:03[
0.219089] pci c.0:
IO window: disabled[
0.219092] pci c.0:
MEM window: disabled[
0.219096] pci c.0:
PREFETCH window: 0x000000fdf000fdffffff[
0.219100] pci c.4: PCI bridge, secondary bus 0000:02[
0.219102] pci c.4:
IO window: 0xd000-0xdfff[
0.219106] pci c.4:
MEM window: disabled[
0.219108] pci c.4:
PREFETCH window: disabled[
0.219112] pci c.5: PCI bridge, secondary bus 0000:01[
0.219115] pci c.5:
IO window: 0xc000-0xcfff[
0.219118] pci c.5:
MEM window: 0xfea00000-0xfeafffff[
0.219121] pci c.5:
PREFETCH window: disabled[
0.219125] pci e.0: PCI bridge, secondary bus 0000:04[
0.219127] pci e.0:
IO window: 0xe000-0xefff[
0.219131] pci e.0:
MEM window: 0xfeb00000-0xfebfffff[
0.219133] pci e.0:
PREFETCH window: disabled[
0.219143] pci c.0: PCI INT A -& GSI 17 (level, low) -& IRQ 17[
0.219147] pci c.0: setting latency timer to 64[
0.219151] pci c.4: PCI INT A -& GSI 17 (level, low) -& IRQ 17[
0.219154] pci c.4: setting latency timer to 64[
0.219159] pci c.5: PCI INT B -& GSI 16 (level, low) -& IRQ 16[
0.219161] pci c.5: setting latency timer to 64[
0.219166] pci e.0: setting latency timer to 64[
0.219169] pci_bus 0000:00: resource 0 io:
[0x00-0xffff][
0.219170] pci_bus 0000:00: resource 1 mem: [0xxffffffffffffffff][
0.219172] pci_bus 0000:03: resource 0 mem: [0x0-0x0][
0.219174] pci_bus 0000:03: resource 1 mem: [0x0-0x0][
0.219175] pci_bus 0000:03: resource 2 mem: [0xfdf00000-0xfdffffff][
0.219177] pci_bus 0000:03: resource 3 mem: [0x0-0x0][
0.219178] pci_bus 0000:02: resource 0 io:
[0xd000-0xdfff][
0.219180] pci_bus 0000:02: resource 1 mem: [0x0-0x0][
0.219181] pci_bus 0000:02: resource 2 mem: [0x0-0x0][
0.219182] pci_bus 0000:02: resource 3 mem: [0x0-0x0][
0.219184] pci_bus 0000:01: resource 0 io:
[0xc000-0xcfff][
0.219186] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff][
0.219187] pci_bus 0000:01: resource 2 mem: [0x0-0x0][
0.219188] pci_bus 0000:01: resource 3 mem: [0x0-0x0][
0.219190] pci_bus 0000:04: resource 0 io:
[0xe000-0xefff][
0.219191] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff][
0.219193] pci_bus 0000:04: resource 2 mem: [0x0-0x0][
0.219194] pci_bus 0000:04: resource 3 io:
[0x00-0xffff][
0.219196] pci_bus 0000:04: resource 4 mem: [0xxffffffffffffffff][
0.219215] NET: Registered protocol family 2[
0.252077] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)[
0.252770] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)[
0.255076] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)[
0.255670] TCP: Hash tables configured (established 262144 bind 65536)[
0.255672] TCP reno registered[
0.264133] NET: Registered protocol family 1[
0.264194] checking if image is initramfs...[
0.386884] rootf unpacking...[
0.386914] Freeing initrd memory: 7814k freed[
0.389771] Scanning for low memory corruption every 60 seconds[
0.389898] audit: initializing netlink socket (disabled)[
0.389913] type=2000 audit(.388:1): initialized[
0.396429] HugeTLB registered 2 MB page size, pre-allocated 0 pages[
0.397221] VFS: Disk quotas dquot_6.5.2[
0.397257] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[
0.397605] fuse init (API version 7.11)[
0.397655] msgmni has been set to 11767[
0.397786] alg: No test for stdrng (krng)[
0.397795] io scheduler noop registered[
0.397797] io scheduler anticipatory registered[
0.397798] io scheduler deadline registered[
0.397806] io scheduler cfq registered (default)[
0.397816] pci .0: Boot video device[
0.398011] pcieport-driver c.0: irq 24 for MSI/MSI-X[
0.398022] pcieport-driver c.0: setting latency timer to 64[
0.398113] pcieport-driver c.4: irq 25 for MSI/MSI-X[
0.398122] pcieport-driver c.4: setting latency timer to 64[
0.398209] pcieport-driver c.5: irq 26 for MSI/MSI-X[
0.398218] pcieport-driver c.5: setting latency timer to 64[
0.398279] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[
0.398969] pciehp: PCI Express Hot Plug Controller Driver version: 0.4[
0.399065] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0[
0.399067] ACPI: Power Button (FF) [PWRF][
0.399106] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1[
0.399107] ACPI: Power Button (CM) [PWRB][
0.399536] ACPI: SSDT
0.399746] processor ACPI_CPU:00: registered as cooling_device0[
0.399961] ACPI: SSDT
0.400169] processor ACPI_CPU:01: registered as cooling_device1[
0.402856] XENFS: not registering filesystem on non-xen platform[
0.403549] Linux agpgart interface v0.103[
0.403557] Serial:
driver, 4 ports, IRQ sharing enabled[
0.404210] brd: module loaded[
0.404428] loop: module loaded[
0.404482] input: Macintosh mouse button emulation as /devices/virtual/input/input2[
0.404501] Driver 'sd' needs updating - please use bus_type methods[
0.404507] Driver 'sr' needs updating - please use bus_type methods[
0.404556] ata_piix f.2: version 2.12[
0.404568] ata_piix f.2: PCI INT B -& GSI 22 (level, low) -& IRQ 22[
0.404571] ata_piix f.2: MAP [ P0 -- P1 -- ][
0.404599] ata_piix f.2: setting latency timer to 64[
0.404662] scsi0 : ata_piix[
0.404717] scsi1 : ata_piix[
0.405660] ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 22[
0.405663] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 22[
0.405677] ata_piix f.5: PCI INT B -& GSI 22 (level, low) -& IRQ 22[
0.405681] ata_piix f.5: MAP [ P0 -- P1 -- ][
0.405707] ata_piix f.5: setting latency timer to 64[
0.405740] scsi2 : ata_piix[
0.405774] scsi3 : ata_piix[
0.406626] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 22[
0.406628] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 22[
0.406846] pata_jmicron .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16[
0.406866] pata_jmicron .0: setting latency timer to 64[
0.406932] scsi4 : pata_jmicron[
0.406967] scsi5 : pata_jmicron[
0.407269] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16[
0.407271] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16[
0.407456] Fixed MDIO Bus: probed[
0.407461] PPP generic driver version 2.4.2[
0.407518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[
0.407531] ehci_hcd a.7: PCI INT C -& GSI 18 (level, low) -& IRQ 18[
0.407541] ehci_hcd a.7: setting latency timer to 64[
0.407544] ehci_hcd a.7: EHCI Host Controller[
0.407584] ehci_hcd a.7: new USB bus registered, assigned bus number 1[
0.411469] ehci_hcd a.7: debug port 1[
0.411474] ehci_hcd a.7: cache line size of 32 is not supported[
0.411483] ehci_hcd a.7: irq 18, io mem 0xfe7fbc00[
0.424024] ehci_hcd a.7: USB 2.0 started, EHCI 1.00[
0.424093] usb usb1: configuration #1 chosen from 1 choice[
0.424125] hub 1-0:1.0: USB hub found[
0.424132] hub 1-0:1.0: 6 ports detected[
0.424208] ehci_hcd d.7: PCI INT A -& GSI 23 (level, low) -& IRQ 23[
0.424214] ehci_hcd d.7: setting latency timer to 64[
0.424217] ehci_hcd d.7: EHCI Host Controller[
0.424245] ehci_hcd d.7: new USB bus registered, assigned bus number 2[
0.428133] ehci_hcd d.7: debug port 1[
0.428137] ehci_hcd d.7: cache line size of 32 is not supported[
0.428145] ehci_hcd d.7: irq 23, io mem 0xfe7fb800[
0.444026] ehci_hcd d.7: USB 2.0 started, EHCI 1.00[
0.444084] usb usb2: configuration #1 chosen from 1 choice[
0.444110] hub 2-0:1.0: USB hub found[
0.444117] hub 2-0:1.0: 6 ports detected[
0.444193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[
0.444203] uhci_hcd: USB Universal Host Controller Interface driver[
0.444239] uhci_hcd a.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16[
0.444243] uhci_hcd a.0: setting latency timer to 64[
0.444246] uhci_hcd a.0: UHCI Host Controller[
0.444277] uhci_hcd a.0: new USB bus registered, assigned bus number 3[
0.444296] uhci_hcd a.0: irq 16, io base 0x[
0.444344] usb usb3: configuration #1 chosen from 1 choice[
0.444359] hub 3-0:1.0: USB hub found[
0.444364] hub 3-0:1.0: 2 ports detected[
0.444412] uhci_hcd a.1: PCI INT B -& GSI 21 (level, low) -& IRQ 21[
0.444416] uhci_hcd a.1: setting latency timer to 64[
0.444418] uhci_hcd a.1: UHCI Host Controller[
0.444443] uhci_hcd a.1: new USB bus registered, assigned bus number 4[
0.444466] uhci_hcd a.1: irq 21, io base 0x[
0.444515] usb usb4: configuration #1 chosen from 1 choice[
0.444530] hub 4-0:1.0: USB hub found[
0.444535] hub 4-0:1.0: 2 ports detected[
0.444583] uhci_hcd a.2: PCI INT C -& GSI 18 (level, low) -& IRQ 18[
0.444587] uhci_hcd a.2: setting latency timer to 64[
0.444589] uhci_hcd a.2: UHCI Host Controller[
0.444616] uhci_hcd a.2: new USB bus registered, assigned bus number 5[
0.444635] uhci_hcd a.2: irq 18, io base 0x[
0.444681] usb usb5: configuration #1 chosen from 1 choice[
0.444700] hub 5-0:1.0: USB hub found[
0.444704] hub 5-0:1.0: 2 ports detected[
0.444757] uhci_hcd d.0: PCI INT A -& GSI 23 (level, low) -& IRQ 23[
0.444760] uhci_hcd d.0: setting latency timer to 64[
0.444763] uhci_hcd d.0: UHCI Host Controller[
0.444789] uhci_hcd d.0: new USB bus registered, assigned bus number 6[
0.444808] uhci_hcd d.0: irq 23, io base 0x[
0.444856] usb usb6: configuration #1 chosen from 1 choice[
0.444872] hub 6-0:1.0: USB hub found[
0.444875] hub 6-0:1.0: 2 ports detected[
0.444924] uhci_hcd d.1: PCI INT B -& GSI 19 (level, low) -& IRQ 19[
0.444928] uhci_hcd d.1: setting latency timer to 64[
0.444930] uhci_hcd d.1: UHCI Host Controller[
0.444957] uhci_hcd d.1: new USB bus registered, assigned bus number 7[
0.444980] uhci_hcd d.1: irq 19, io base 0x[
0.445031] usb usb7: configuration #1 chosen from 1 choice[
0.445046] hub 7-0:1.0: USB hub found[
0.445049] hub 7-0:1.0: 2 ports detected[
0.445098] uhci_hcd d.2: PCI INT C -& GSI 18 (level, low) -& IRQ 18[
0.445102] uhci_hcd d.2: setting latency timer to 64[
0.445104] uhci_hcd d.2: UHCI Host Controller[
0.445128] uhci_hcd d.2: new USB bus registered, assigned bus number 8[
0.445146] uhci_hcd d.2: irq 18, io base 0x[
0.445192] usb usb8: configuration #1 chosen from 1 choice[
0.445207] hub 8-0:1.0: USB hub found[
0.445212] hub 8-0:1.0: 2 ports detected[
0.445291] usbcore: registered new interface driver libusual[
0.445321] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1[
0.445322] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp[
0.445691] serio: i8042 KBD port at 0x60,0x64 irq 1[
0.445731] mice: PS/2 mouse device common for all mice[
0.445792] rtc_cmos 00:03: RTC can wake from S4[
0.445815] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0[
0.445835] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs[
0.445894] device-mapper: uevent: version 1.0.3[
0.445936] device-mapper: ioctl: 4.14.0-ioctl () initialised: [
0.445994] device-mapper: multipath: version 1.0.5 loaded[
0.445996] device-mapper: multipath round-robin: version 1.0.0 loaded[
0.446077] cpuidle: using governor ladder[
0.446079] cpuidle: using governor menu[
0.446335] TCP cubic registered[
0.446410] NET: Registered protocol family 10[
0.446711] lo: Disabled Privacy Extensions[
0.446907] NET: Registered protocol family 17[
0.446918] Bluetooth: L2CAP ver 2.13[
0.446920] Bluetooth: L2CAP socket layer initialized[
0.446921] Bluetooth: SCO (Voice Link) ver 0.6[
0.446922] Bluetooth: SCO socket layer initialized[
0.446939] Bluetooth: RFCOMM socket layer initialized[
0.446943] Bluetooth: RFCOMM TTY layer initialized[
0.446944] Bluetooth: RFCOMM ver 1.11[
0.447364] registered taskstats version 1[
Magic number: 1:626:921[
0.447535] rtc_cmos 00:03: setting system clock to
05:54:09 UTC ()[
0.447538] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[
0.447539] EDD information not available.[
0.500605] Switched to high resolution mode on CPU 1[
0.504030] Switched to high resolution mode on CPU 0[
0.734518] ata3: SATA link down (SStatus 0 SControl 300)[
0.880040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)[
0.888374] ata1.00: HPA detected: current , native [
0.888380] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133[
0.888383] ata1.00:
sectors, multi 16: LBA48 NCQ (depth 0/32)[
0.904393] ata1.00: configured for UDMA/133[
0.904512] scsi 0:0:0:0: Direct-Access
Hitachi HDT72101 ST6O PQ: 0 ANSI: 5[
0.904585] sd 0:0:0:0: Attached scsi generic sg0 type 0[
0.904620] sd 0:0:0:0: [sda]
512-byte hardware sectors: (1.00 TB/931 GiB)[
0.904630] sd 0:0:0:0: [sda] Write Protect is off[
0.904632] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[
0.904648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[
sda: sda1 sda2 & sda5 sda6 &[
0.930604] sd 0:0:0:0: [sda] Attached SCSI disk[
1.136008] usb 3-2: new full speed USB device using uhci_hcd and address 2[
1.234537] ata2: SATA link down (SStatus 0 SControl 300)[
1.306433] usb 3-2: configuration #1 chosen from 1 choice[
1.314396] hub 3-2:1.0: USB hub found[
1.315383] hub 3-2:1.0: 3 ports detected[
1.560005] usb 5-2: new full speed USB device using uhci_hcd and address 2[
1.562512] ata4: SATA link down (SStatus 0 SControl 300)[
1.716086] Freeing unused kernel memory: 568k freed[
1.716248] Write protecting the kernel read-only data: 6880k[
1.721820] usb 5-2: configuration #1 chosen from 1 choice[
1.798413] usb 3-2.1: new full speed USB device using uhci_hcd and address 3[
1.917421] sky2 driver version 1.22[
1.917465] sky2 .0: PCI INT A -& GSI 17 (level, low) -& IRQ 17[
1.917478] sky2 .0: setting latency timer to 64[
1.917502] sky2 .0: Yukon-2 EC Ultra chip revision 3[
1.917668] sky2 .0: irq 27 for MSI/MSI-X[
1.918127] sky2 eth0: addr 00:1d:60:00:c6:f6[
1.938526] usb 3-2.1: configuration #1 chosen from 1 choice[
2.004329] ohci:02.0: PCI INT A -& GSI 20 (level, low) -& IRQ 20[
2.022445] usb 3-2.3: new low speed USB device using uhci_hcd and address 4[
2.025622] usbcore: registered new interface driver hiddev[
2.027619] input: Dell Dell USB Keyboard Hub as /devices/pci0:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input3[
2.027669] generic-usb 10.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-a.0-2.1/input0[
2.032462] input: Dell Dell USB Keyboard Hub as /devices/pci0:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input4[
2.032495] generic-usb 10.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-a.0-2.1/input1[
2.032508] usbcore: registered new interface driver usbhid[
2.032510] usbhid: v2.6:USB HID core driver[
2.066034] ohci1394: fw-host0: OHCI- (PCI): IRQ=[20]
MMIO=[febff800-febfffff]
Max Packet=[65536]
IR/IT contexts=[4/4][
2.066050] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes[
2.156510] usb 3-2.3: configuration #1 chosen from 1 choice[
2.174708] input: Logitech USB Mouse as /devices/pci0:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input5[
2.174770] generic-usb D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-a.0-2.3/input0[
2.185240] PM: Starting manual resume from disk[
2.185243] PM: Resume from partition 8:5[
2.185244] PM: Checking hibernation image.[
2.185346] PM: Resume from disk failed.[
2.205226] EXT4-fs: barriers enabled[
2.215033] kjournald2 starting: pid 774, dev sda1:8, commit interval 5 seconds[
2.215053] EXT4-fs: delayed allocation enabled[
2.215055] EXT4-fs: file extents enabled[
2.220354] EXT4-fs: mballoc enabled[
2.220366] EXT4-fs: mounted filesystem sda1 with ordered data mode[
4.858426] udev: starting version 141[
5.091178] input: PC Speaker as /devices/platform/pcspkr/input/input6[
5.103282] iTCO_vendor_support: vendor-support=0[
5.120061] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x0598 pid 0x0103[
5.120089] usbcore: registered new interface driver usblp[
5.159438] agpgart-intel .0: Intel G33 Chipset[
5.159851] agpgart-intel .0: detected 7164K stolen memory[
5.162020] agpgart-intel .0: AGP aperture is 256M @ 0xd0000000[
5.189453] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05[
5.189515] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)[
5.189565] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)[
5.458212] HDA Intel b.0: PCI INT A -& GSI 22 (level, low) -& IRQ 22[
5.458232] HDA Intel b.0: setting latency timer to 64[
5.536107] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...[
5.666167] lp: driver loaded but no devices found[
5.739849] Adding 9960260k swap on /dev/sda5.
Priority:-1 extents:1 across:9960260k [
6.263491] EXT4 FS on sda1, internal journal on sda1:8[
7.011697] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled[
7.012851] SGI XFS Quota Management subsystem[
7.050301] XFS mounting filesystem sda6[
7.189380] Ending clean XFS mount for filesystem: sda6[
8.569553] vboxdrv: Trying to deactivate the NMI watchdog permanently...[
8.569557] vboxdrv: Successfully done.[
8.569558] vboxdrv: Found 2 processor cores.[
8.570530] VBoxDrv: dbg - g_abExecMemory=ffffffffa025ae40[
8.570549] vboxdrv: fAsync=0 offMin=0x18f offMax=0x314d[
8.570591] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.[
8.570593] vboxdrv: Successfully loaded version 3.0.2 (interface 0x000e0000).[
8.774356] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa03fc800[
8.776354] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa041af60[
9.717044] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[
9.717046] Bluetooth: BNEP filters: protocol multicast[
9.743069] Bridge firewalling registered[
10.872753] ppdev: user-space parallel port driver[
12.552343] [drm] Initialized drm 1.1.0 [
12.689323] pci .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16[
12.689328] pci .0: setting latency timer to 64[
12.694635] mtrr: type mismatch for d00000 old: write-back new: write-combining[
12.694638] [drm] MTRR allocation failed.
Graphics performance may suffer.[
12.694657] pci .0: irq 28 for MSI/MSI-X[
12.694676] [drm] Initialized i915 1.6.0
for .0 on minor 0[
14.950705] sky2 eth0: enabling interface[
14.951551] ADDRCONF(NETDEV_UP): eth0: link is not ready[
17.257013] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both[
17.257867] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[
22.302767] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)[
27.420505] eth0: no IPv6 routers present
显示帖子 : 全部帖子1天7天2周1个月3个月6个月1年&排序 作者发表时间文章标题 升序降序&
&[ 8 篇帖子 ]&
正在浏览此版面的用户：没有注册用户 和 4 位游客
您 不能 在这个版面发表主题您 不能 在这个版面回复主题您 不能 在这个版面编辑帖子您 不能 在这个版面删除帖子您 不能 在这个版面提交附件
选择一个版面
------------------
公告/注意事项
& &新闻和通知
& &校园社团支持
& && &华东校区
& && &华南校区
& && &华北校区
& && &华中校区
& && &东北校区
& && &西北校区
& && &港澳台校区
& && &国外校区
& &软件推荐
& &非常任务
系统安装区
& &教学和常见问答
& && &课堂教学和培训
& &初学者园地 - 15.10
& &系统安装和升级
& && &新立得和软件源
& && &Wubi安装讨论
& &启动和引导
& &网卡问题以及网络和拨号
& && &校园网拨号
& &笔记本、UMPC支持
& &手机和平板
& && &Ubuntu移动应用开发
& &常用硬件支持
& &系统架构支持
配置美化区
& &字体美化和中文支持
& && &个人配置文件存放点
& &桌面特效
& &窗口管理器
& &屏幕抓图
& &办公、图像、机械电子设计等
& && &Vim和Emacs
& &因特网相关软件
& &影音多媒体
& &Wine及其分支
& &游戏和游戏模拟器
& &虚拟机和虚拟化
& &其它类软件
& &开源模板库
服务器管理
& &服务器基础应用
& &数据库管理
& &服务器维护和硬件相关
& &Ubuntu VPS
参与Ubuntu开发
& &软件和文档翻译
& &编译或打包
& &Ubuntu错误报告
程序设计区
& &Shell脚本
& &GTK+和QT
& &软件/网站开发
& && &Python/Php/Perl
& && &C/C++/Java
& &内核及嵌入式开发
& &开源小工具
& &Ubuntu 16.04
& &Ubuntu 14.10
& &Ubuntu 14.04 LTS
& &Ubuntu 12.04 LTS
& &Ubuntu 10.04 LTS
& &老旧版本支持
& && &Ubuntu 15.04
衍生发行版
& &Ubuntu GNOME
& &Kubuntu
& &Xubuntu & Lubuntu
& &Ubuntu中文衍生版
& && &Deepin
& && &UbuntuKylin
& &Ubuntu国外衍生版
& && &Mint
& &Ubuntu衍生版制作
& &其它类Unix OS发行版
& && &Arch发行版
& && &Debian发行版
& && &OpenSUSE发行版
& &深度PK版
& &Ubuntu故事和感慨
& &Full Circle开源杂志
分享交流区
& &同城交流
& &线下活动专版
& &Ubuntu宣传推广
& &论坛管理
& && && &Ubuntu中文网上商店}