pop.document.write('' + code.innerHTML + '');
pop.document.close();
ArbExpress is a waveform creation and editing tool for Tektronix AWG and AFG instruments. It provides an easy to use and efficient way to create and edit waveforms, transfer waveforms to and from Arbitrary Waveform Generators (AWG), and Arbitrary/Function Generators (AFG), and remotely control AWGs and AFGs. It can import waveforms from Tektronix oscilloscopes and convert them to AWG/AFG file formats.
Version: V2.9
软件类型: Update
发布日期: May 28 2013 - 12:30 pm
************************************************************
* Tektronix ArbExpress Application Software Release Notes *
************************************************************
Product: Tektronix ArbExpress Application Software
Version: 2.9
Last Revised: 7,April, 2013
Contents of these release notes:
1) Description
2) Target Platforms
3) What's new¡
4) Known Issues
5) Software Compatibility
6) Installation Issues
7) Viewing Sample Files
8) Contacting Tektronix
***************
* Description *
***************
Tektronix ArbExpress is an application for creating waveforms for
Tektronix's signal sources. It allows you to create and edit waveforms,
transfer waveforms to and from Arbitrary Waveform Generators (AWG),
and Arbitrary/Function Generators (AFG), and remotely control AWGs and AFGs.
You can import waveforms from Tektronix oscilloscopes and convert them to AWG/AFG file formats.
ArbExpress supports generating the following standard waveforms:
- Sine, Square, Triangle, Pulse, DC, Exponential Rise, Exponential Decay,
Noise, Sinc, Sweep, Multi-Tone, and Lorentz.
********************
* Target Platforms *
********************
ArbExpress is PC-based software that runs on the following platforms:
Windows 7 Enterprise
Windows XP Professional
Windows 2000
Windows NT
Windows 98\Me
***********************
* What's new in v2.9¡ *
***********************
1. Support Windows 7 Enterprise platform.
This version is compatible with TekVisa 4.0.0.80 or above.
***********************
* What's new in v2.8¡ *
***********************
1. Support new AFGC/C/C/CGSA/C/3252CGSA model.
***********************
* What's new in v2.7¡ *
***********************
1. Support new AFG2021 model.
***********************
* What's new in v2.6¡ *
***********************
1. Support for AWG5000C and AWG7000C models in Continuous Mode.
***********************
* What's new in v2.5¡ *
***********************
1. Support for AWGB and AWGB models in Continuous Mode.
***********************
* What's new in v2.4¡ *
***********************
1. Support for new AFG3011 model.
***********************
* What's new in v2.3¡ *
***********************
1. Support new AFG3021B and AFG3022B models.
2. Now ArbExpress can import waveforms from the MSO series of Oscilloscopes.
2. Bug fix: Direct importing of data from DPO had problems. This has been fixed
3. Bug fix: Opening DPO files had problem. This has been fixed.
4. Bug fix: Incorrect data sent to AFG with csv file. This is fixed now.
5. Bug fix: Waveform generated for Exponential rise and decay was incorrect. This is fixed now.
***********************
* What's new in v2.2¡ *
***********************
1. Supports waveform import from new Tektronix Oscilloscopes.
2. Bug fix: Two header less csv files could not be opened in the same wave book.
This has been fixed now.
3. Bug fix: Transferring headerless csv file to instrument transfers the
waveform reduced by two points. This has been fixed.
4. Bug fix: Sometimes ArbExpress did not allow user to disconnect
the instrument once it was connected.
5. Bug fix: User could change the sampling rate for AFG3000 using waveform properties.
Now sampling rate combo box is now disabled.
6. Bug fix: Resolved discrepancy of Point draw interpolation mode selected
between toolbar and point draw table.
7. Bug fix: OLH had incorrect example for transferring file directly from Matlab environment.
8. Bug fix: Waveform got corrupted when transferring a waveform of maximum
record length to AFG300 instrument. This is fixed now.
***********************
* What's new in v2.1¡ *
***********************
1. Bug fix: AFG 3000 series instrument specification was incorrect.
In previous version while using standard waveform and
Equation editor user was limited 16K.
2. Bug fix: Sometimes when acquiring waveform from TDS 3000 using "Import from scope"
dialog application might hang.
3. Bug fix: While saving AFG3000 *.tfw file application might create *.set file when the instrument
select is AWGxxx or
AFG3xx or AWG2xxx.
4. Now ArbExpress can import waveforms from CSA7000 series of oscilloscopes.
5. When the File transfer dialog is opened for the first time the default folder is set to C:.
6. Bug fix: Change in the Control panel regional and language settings will not affect ArbExpress behavior.
7. Bug fix: Transferring file with extension .txt had issues, which has been fixed now.
***********************
* What's new in v2.0¡ *
***********************
1. Point draw mode - This feature enables you to create waveforms by entering waveform points
as time and amplitude data and to edit the waveform between selected points.
The software can connect the points via Linear, Smooth (Cubic Spline) and Staircase algorithms.
2. Supports waveform import from TDS5K, 6K and 7K Oscilloscopes.
3. Supports AFG3000 Series of Arbitrary/Function Generators.
4. Remembers the last selected instrument (AWG/AFG).
5. Resampling - Waveform can be resampled using Linear and Sinc algorithms.
6. Shift/Rotate - Waveform can be shifted or rotated within cursors.
7. Scope acquisition wizard has been added, which enables user to import waveform from
Tektronix Oscilloscopes more conveniently.
8. Access to multiple waveform properties from Equation editor and Standard waveform dialog boxes.
9. Increased number of zoom levels in Wavebook window.
*******************
* Changes in v1.1 *
*******************
1. Create and Delete folders/Files in the remote instrument explorer view.
2. Validation of Waveform before sending the waveform to the instrument connected.
3. Complimentary channels will also be enabled at the end of file transfer.
4. Waveform can be sent directly from Equation editor to the instrument similar to
the feature available in the standard waveform.
5. Ten most recently used IP addresses will be remembered with Instrument name.
6. In File transfer and control dialog, last selected path will be remembered in the PC explorer view.
7. Offset is added between the waveform and boundary of waveform display.
8. Added more sample files in the sample directory.
****************
* Known Issues *
****************
File Transfer and Control Refresh - To display the active list of instruments,
refresh from application will not refresh TekVisa. TekVisa has to be refreshed by right clicking
and selecting Refresh option on the system tray TekVisa icon.
Normalization - All waveforms when transferred to AFG300/AFG3000 or saved as *.tfw
will be normalized automatically.
Pasting non-textual objects in Equation Editor - Pasting any non-textual objects may
cause an exception which can be ignored.
AWG gets into busy mode - Sometimes AWG may not respond when file transfer
through LAN is aborted. You may have to restart the instrument.
Saving AWG2000 files - While saving AWG2000 files, normalization has to be selected
for saving the waveform without getting truncated.
Equation Editor only supports AWG2000 series text file formats.
Using NI Visa ArbExpress may not work as expected if NI Visa is installed without uninstalling TekVisa.
Uninstall TekVisa completely before installing NI Visa.
Waveform Properties - When invoked from Standard waveform and Equation editor then
"Active Waveform" tab will be disabled.
Application will not generate AFG3000 series setup file *.tfs.
Using TekVisa the connections of multiple instruments via USB might fail without notification.
The connection of AFG3000 Series via USB may drop over time.
ArbExpress requires AWG500 with V3.0 or higher version.
ArbExpress supports only VXI-11 server connections for AWG5K and AWG 7K
series instruments for LAN support.
ArExpress may create and transfer waveforms above 32M if sufficient
memory is available in free store.
**************************
* Software Compatibility *
**************************
The following table shows the individual components of the Tektronix ArbExpress Application
Software and their respective version numbers.
Also shown are the other major ArbExpress software components that are external to
the ArbExpress Application Software (i.e. installed separately).
Release ArbExpress Application SW ArbExpress Application TekVisa Microsoft .NET Framework
2.9 2.9 2.9 .0.0.80 1.1
2.8 2.8 2.8 .3.4.6 1.1
2.7 2.7 2.7 .3.4.6 1.1
2.6 2.6 2.6..3.4.6 1.1
2.5 2.5 2.5..3.2.7 1.1
2.4 2.4 2.4..3.0.Build 14 1.1
2.3 2.3 2.3..02 build 33
2.2 2.2 2.2..0 Build 7 1.1
2.1..03 Build 97 1.1
2.0 2.0 2.0..03 1.1
1.0 1.0 1.0.2004.36
**********************
* Installation Notes *
**********************
You need to have administrator privileges to install Tektronix ArbExpress software in your system.
The Installation program will display a warning message if you do not have administrator privileges.
If you proceed by ignoring this warning, the application may not install properly.
If you have not installed TekVisa 4.0.0.80 or above and .Net Framework 1.1 or above then
the ArbExpress installation program detects and prompts the user to install the above mentioned software at the end of the installation.
If you want to reinstall your Tektronix ArbExpress application software, you must first remove the existing software.
You can uninstall the software by going to Control Panel & Add Remove Programs and selecting Tektronix ArbExpress.
If a failure occurs at any point during the installation of Tektronix ArbExpress,
the installer will not perform a complete uninstall. For this reason, it is important not to pre-maturely
close the installer application by clicking on its close box in the upper-right corner of the
the installer will automatically close the background window.
For details regarding the installation and use of ArbExpress software, refer to the ArbExpress Installation Manual.pdf file.
************************
* Viewing Sample Files *
************************
The installation program will copy several ArbExpress sample files onto the target folder.
You can open this folder through the shortcut menu Start & Programs & Tektronix ArbExpress & Samples.
Under this folder, there will be two sub folders viz. Equations and Waveforms.
The Equations folder contains a few sample equation files which can be opened from the Equation Editor.
The Waveforms folder contains a few sample files that can be opened in the ArbExpress Application.
The installation program will copy Matlab-AWG connectivity files onto the target folder.
You can open this folder through the shortcut menu Start & Programs & Tektronix ArbExpress & Tools & Matlab.
************************
* Contacting Tektronix *
************************
If you have any questions, please contact the Tektronix Technical Support Center:
1-800-833-9200*
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR, 97077
Sales support
1-800-833-9200, select option 1*
Service support
1-800-833-9200, select option 2*
Technical Support Email:
1-800-833-9200, select option 3*
6:00 a.m - 5:00 p.m. Pacific Time
---------------------------------------------------------------------------------------------------------------------------
* This number is toll free in North America. After office hours, please leave a voice mail message.
Outside North America, contact a Tektronix sales o see the Tektronix web site for a list of offices.
Installation
This Installation guide contains installation information and the
system requirements for the ArbExpress Waveform Creation and
Editing Tool for Tektronix AWG/AFG version 2.9.
Minimum System Requirements
OS supported Minimum requirements
- Windows 7 Enterprise
- Windows XP Professional Service Pack 1
- Windows 2000
- Windows Me
- Windows 98 SE
- Windows NT Service Pack 6a
Pentium III @ 800 MHz and higher
256 MB RAM
300 MB Free Disk Space
Microsoft Internet Explorer 5.01 and higher
.NET Framework 1.1 Redistributable Installation
800x600 display resolution
ArbExpress Version 2.9 Instructions
1. Download the ArbExpress setup file and double-click it. The Install
Shield wizard displays the Splash Screen.
2. Follow the instructions given by the InstallShield wizard.
3. The installation follows this sequence of steps: Welcome, View Release
Notes (optional). License Agreement, Choose Destination Location,
Start Copying Files, Setup Status.
- Click Next to continue and navigate through the InstallShield wizard.
- Click Back if you want to change the settings in the previous window.
4. In the Welcome window, click on the Release Notes button to view the
release notes.
Then click Next to display the License Agreement window.
5. In the License Agreement window, do the following:
- Read the License Agreement carefully.
- Select the I accept the terms of the License agreement option to continue.
6. After you have selected the I accept the terms of the License agreement
option, then click Next to display the Choose Destination Location window.
7. In the Choose Destination Location window, do one of the following:
- To install ArbExpress in the default folder
C:\Program Files\Tektronix\ArbExpress click Next.
- To change the location where you would like to install the ArbExpress
software, click Browse and browse to the location.
8. Click Next to display the Start Copying Files window. This window displays
the disk space available and the disk space required to install ArbExpress.
9. Click Next to start installation. The Setup Status window displays a progress
bar. ArbExpress will be installed in the selected folder with a shortcut in the
Start menu.
10. When the installation is complete, the message ArbExpress Software Setup
completed successfully is displayed. If you do not have TekVisa
and .NET Runtime Framework version 1.1 installed on your computer,
ArbExpress detects this and displays a message to install these before
running ArbExpress.
11. Click Finish to exit.
Launching the Application and Online Help
After you have installed the application you can run the ArbExpress
software by clicking
Start & Programs & Tektronix ArbExpress& ArbExpress Application.
You can display the online help by clicking
Start & Programs & Tektronix ArbExpress& ArbExpress Help
Contacting Tektronix
Phone 1-800-833-9200*
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077, USA
Sales support 1-800-833-9200, select option 1*
Service support 1-800-833-9200, select option 2*
Technical support Email:
1-800-833-9200, select option 3*
6:00 a.m. -- 5:00 p.m. Pacific time
* This phone number is toll free in North America. After office
hours, please leave a voice mail message.
Outside North America, contact a Tektronix sales o
see the Tektronix web site for a list of offices.
By downloading, you agree to the terms and conditions of the .
此软件适用于: AFG2021, AFG3011, AFG3011C, AFG3021B, AFG3021C, AFG3022B, AFG3022C, AFG3051C, AFG3052C, AFG3101, AFG3101C, AFG3251, AFG3251C, AFG3252, AFG3252C, AFG3102C, AFG3102
相关产品信息
会员资格：创建具有专用会员特权的账户。
This JavaScript enables OnlineOpinion, a method for collecting secure feedback data.【图】- 大众途观原装车载TOPPOWER 4EV 可议价 - 上海长宁天山路汽车用品/配件 - 百姓网
&&关注百姓微信公众号，尽享快捷刷新、信息推送、抽奖活动等众多微信功能您只需要：1 &用微信“扫一扫”右边的二维码2 &在微信中“关注”我们&|&|||||大众途观原装车载TOPPOWER 4EV 可议价&提示信息设置为“搞定了！”状态后，其他用户将无法查看您的联系方式。您确认搞定了这条信息吗？提示重新发布后可使用“刷新”将发布时间更新为最新时间，并将信息排到第一页。&&1月6日 23:35 &...次浏览 &信息编号： &1391673****(上海)&&百姓网号码保护功能介绍&&拨打百姓400转呼电话绝不收取您任何额外费用，该信息发布人仍能看到您的来电号码。联系时，请一定说明在百姓网看到的，谢谢！见面最安全，发现问题请举报。价格：500元类型：& 地区：&-&品种：大众途观原装车机
型号：TOPPOWER && 4EV
货物来源：全新未使用。原车拆机。
输入电压：车载12V
外观成色：全新
内部成色：全新
修摩情况：无修无摩
机器状况：正常
格：500元可议
【产品描述】支持单碟cd，SD卡，AUX外接音频，蓝牙免提，蓝牙音频
1.支持来电显示 ；当对方来电时，号码可以滚动显示在CD屏幕上。
2.在任何音源（CD SD FM ）播放状态下，来电自动静音切入电话状态。
3.驾驶过程中音响关闭状态下,来电也可以自动启动蓝牙。通完话自动关机。
4.可以呼叫已拨电话的最后一个号码，还可以一键直接呼叫大众客服电话。
5.具备私密通话模式，方便切换手机和蓝牙发出的声音。
6.MP3 WMA支持目录管理，中文歌名，中文目录、歌名浏览。
7.SD卡最大支持32GSD卡。
8.低音 中音 高音音效调节。
9.超酷黑底白字冷光显示。
10.前面板直插SD卡，AUX音频输入(方便连接手机 PSP 笔记本等）。
11.支持MP3 WMA目录管理断电记忆播放，中文目录，中文歌名显示。该用户其他信息1月6日&长宁 - 天山路30元&/&宽带及配件1月5日&&闸北750元&/&其他
反馈建议描述：请填写描述手机号：请填写手机号请填写手机号该公司其他职位
没有找到 延锋伟世通电子科技(上海)有限公司招聘 的相关职位
类似的公司
上海最佳人气招聘企业
举报类型：
问题描述：(选填)
邮箱地址：(选填)
感谢你的反馈意见!
微信公众号
手机适配版Password：
软件计划文控工程师SW P&R Associate
&&&&&&&&Industry：&&Automobile & ComponentsCompany Type：&&Joint VenturesCompany Size：&&500-1000 &&&
Posting Date：Location：Shanghai-XuhuiNo. of Hiring：1Experience：2 yearsLanguage：English&Very GoodEducation：BachelorSalary：Negotiable&&&&&
Job Function:&&Software Engineer&&
Job Description:
岗位名称软件计划文控工程师 Software Planning and Release Associate工作概要Is responsible for development and maintenance of software processes and project tracking and other duties as stipulated by the software senior manager. Is responsible for ensuring robust management and compliance with relevant standards and practices.负责软件过程和项目跟踪的开发和维护，以及软件高级经理布置的其他职责；确保健全的管理和相关标准及实践的遵守。主要职责与衡量标准1、Project management time tracking tools项目管理时间跟踪工具2、Support meetings includes sending out agendas, inviting participants and taking minutes支持会议，包括发送议事日程、邀请参与人员和会议记录3、Team support for CM (Configuration Mgmt) and defect tracking tools支持团队的配置管理和缺陷跟踪系统4、Project Metrics collection项目度量收集5、Perform Software Release readiness audit实施软件发布完整度审计岗位要求学历：本科 专业背景：电气，电子，仪表，计算机专业语言要求：英语熟练 工作经验：熟练运用Microsoft Project或相关的时间跟踪工具；良好的团队合作能力；了解数据库和管理信息系统
*提醒：用人单位招聘人才，以任何名义向应聘者收取费用都属于违法（如体检费、兼职淘宝刷钻等），请应聘者提高警惕！
延锋伟世通电子科技（上海）有限公司（以下简称“科技公司”）的前身是延锋伟世通汽车电子有限公司的研发中心，在2011 年注册成为电子公司的全资子公司。科技公司是一个集产品开发、设计、工程测试及验证于一体的高科技公司，致力于研发世界水平的汽车电子产品，公司为全球知名汽车制造商提供优质的电子产品。公司不仅具有海外产品开发能力，同时致力于产品本地化的研究与开发。主要产品涉及车载娱乐系统、驾驶信息系统和控制系统三大产品线的软硬件研发。具体产品包括车载收音机、CD 机、DVD、导航、车载信息系统、功放、蓝牙模块、仪表、时钟、多功能显示模块、空调控制器、中控电子、车身控制模块、自适应前大灯控制系统、无钥匙进入系统、电池管理系统、动力控制模块和新能源汽车电子等多类产品的控制软件。科技公司实行总经理负责制，下设三大产品研发体系及产品创新/平台体系。三大主导产品线包括音响娱乐系统（AI）、驾驶信息系统（DI）和中控电子模块（CSE）。特别是产品创新/平台的研发是我们核心技术的突破方向。公司组织涵盖软硬件开发设计部门、产品验证及测试部门，另设产品过程控制/工程服务部以及前期工程部门。目前公司有近500名工程师，包括电子、软件、结构等不同领域。
Address：徐汇区钦州北路1001号&&&&&&&&&Postal Code：200233
City ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity ChannelsCity Channels
新版企业粉丝团终于上线了，全新的界面展示，更多的互动体验，千年等一回，Let's go go go！}