Stack Overflow is a question and answer site for professional and enthusiast programmers. It's 100% free, no registration required.
I am using PChart for PHP to draw graphs, it is working pretty well.
I have drawn a graph with intensities (2 = strong, 1 = medium, 0 = low) and I would like to know if is possible to show on the Y axis the description of the data (strong,medium,low) instead of the inappropriate numbers (2,1,0).
(I have search a lot without success, theoretically you can only set the X labels according to .)
There is a way of assigning Y formats.
Currently there are 5: Number, Time, Date, Metric and Currency.
You set this in the pData class by using the function SetYAxisFormat($Format)
What you would have to do to acheive what you want is to modify the pChart.class file and include your own formatter function.
In various places in the pChart.class file, there is the following section of code:
if ( $DataDescription["Format"]["Y"] == "number" )
$Value = $Value.$DataDescription["Unit"]["Y"];
if ( $DataDescription["Format"]["Y"] == "time" )
$Value = $this-&ToTime($Value);
if ( $DataDescription["Format"]["Y"] == "date" )
$Value = $this-&ToDate($Value);
if ( $DataDescription["Format"]["Y"] == "metric" )
$Value = $this-&ToMetric($Value);
if ( $DataDescription["Format"]["Y"] == "currency" )
$Value = $this-&ToCurrency($Value);
To add your own intensity function, after this bit you would need to add:
if ( $DataDescription["Format"]["Y"] == "intensity" )
$Value = $this-&ToIntensity($Value);
Then you would need to add your own ToIntensity($Value) function inside the class:
function ToIntensity($Value)
switch($Value) {
return "low";
return "medium";
return "strong";
Your Answer
Sign up or
Sign up using Google
Sign up using Facebook
Sign up using Stack Exchange
Post as a guest
Post as a guest
By posting your answer, you agree to the
Not the answer you're looking for?
Browse other questions tagged
Stack Overflow works best with JavaScript enabledFANUC报警号；EX1003 -Y-AXIS OVER HARD CIMIT! 求解_百度知道
FANUC报警号；EX1003 -Y-AXIS OVER HARD CIMIT! 求解
提问者采纳
超程报警！意思是Y轴负方向超限位。而且你后面的CIMIT应该是LIMIT
可是工作台没有超程啊，我今天检查了一下，原来是手轮线，全部断了，线乱了，接不起，你有什么好办法吗？
简单办法就是换个手轮，800~1200RMB不等。里面线全断是什么意思？，每一根线颜色，花纹不一样，你可以按照一样的接起来。手轮线基本的就几根，+12/+5V；OV;PA;PB;分别对应一根线，一般线头上都有类似的记号。然后就是X;Y;Z轴的3根线，调速x1；x10；x100的3根，再有2根电压线。说这么多肯定迷糊了吧，只要对应颜色接就行。买新手论的话，最好让厂家来帮你接，如果不方便，你就对应手轮说明书和你机床上的记号接线。最重要的是！！！+12/+5电压必须接对，（有的首轮是要5V电压。有的要12V电压）。
提问者评价
按照你说的，真的成功了，好开心，谢谢你！
其他类似问题
cimit的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁&&&y axis 在 计算机硬件技术 分类中
的翻译结果:
查询用时：2.073秒
&在分类学科中查询
&&&&&&&&&&()()()
&&&&Results CT measurement showed:z axis (0.82±0.31 ) cm ( range :0.5-1.2 cm),x axis ( 0.30±0.13 ) cm ( range:0.0 -0.5 cm),y axis (0.33 -+0.10) cm (range:0.2-0.6 cm) ;
&&&&结果肿瘤动度的CT测量结果为z轴方向(0．82±0．31)cm(0．5～1．2 cm),x轴方向(0．30±0．13)cm(0．0～0．5 cm),y轴方向(0．33±0．10)cm(0．2～0．6 cm)；
&&&&Results: The cephalometric analysis showed that the angle of SNA,U1-SN,U1-NA,ANB,Y axis increased and the angle of SNB,L1-NB,L1-MP decreased on the end of this stage in all patients.
&&&&结果:所有病例在该期治疗结束时SNA、U1-SN、U1-NA、ANB、Y轴角增大; SNB、L1-NB、L1-MP减小。
&&&&Crystal Growth of ?φ53×180mm Optical Y Axis LiNbO_3
&&&&φ53×180mm光学Y轴LiNbO_3晶体生长
&&&&Results: There are no changes in FH-SN, Y axis angle, N-S-ANS, S-N-ANS, N-S-Gn, S-N-Gn, FMA and RP-MP before and after treatment in statistical sense and S-NU S-ANS and S-Gn changed in statistical sense in male and female group in the 11 cranio-
&&&&结果：11项硬组织测量指标中的8项角度指标FH-SN、Y轴角、N-S-ANS、S-N-ANS、第四军医大学硕士学位论文N一S一Gn、S一Gn、FMA和RP一MP角矫治前后的改变均无统计学意义，3项长度测量指标S一N、S.
&&&&Easy access to the oscilloscope Y axis using the computer card, which has 16 spaces and the conversion accuracy of the sampling frequency of 44.1KHz, has resulted in the virtual oscilloscope can reach around 20K analog bandwidth, suitable for low frequency (0~20KHz) data collection application occasions.
&&&&该简易示波器的Y轴通道采用计算机中的声卡,它具有16位的转换精度和44.1KHz的采样频率,致使本虚拟示波器可以达到20K左右的模拟带宽,适合低频(0～20KHz)数据采集应用场合。
&&&&Methods: We sideling incised pancreas envelope along the pancreas y
axis,pancreas body become flexible,omental bursa put a duct drainage.
&&&&方法 :沿胰腺纵轴和与纵轴斜行切开胰腺包膜 ,腺体松动 ,小网膜腔置管灌洗引流。
&&&&With this program, we can get output curves that the Y
axis has “Relative unit" or “LOG unit” while in X
axis the plotting range can be arbitrarily defined.
&&&&利用此程序 ,可以得到纵轴上有相对单位及对数单位两种格式、横轴上可随意定义绘图区间的输出曲线。
&&&&If the nearest distance between a point target and SAS moving-track is R0 and the coordinate of Y axis is y0,the echo delay time is:
The response of the point target is:
The response of quadtature demodulation is:
Using the principle of phase continuance，we can get the spectrum of chirp modulation:
The result after pulse compression is:
In it, k is constant，sinc(.)
&&&&如果一个点目标与SAS航迹的最小距离为
，沿y轴的坐标为y0。 则SAS回波信号的时延为：点目标的响应：正交解调后的响应：利用相位驻留原理，可得到线性调频信号的频谱：可得到脉冲压缩后的结果：这里K是常数，sinc(·)为抽样函数。
&&&&According to the emulation, the effect of the second and the third harmonics of rotor, the effect of area difference of a pair electrodes along
axis or along
axis, the effect of the stagger of electrode along
axis and the effect of the deviation of rotor center from electrode center are shown.
&&&&图形仿真结果直观地表明了转子的二次谐波、三次谐波，沿x轴、y轴相对电极的面积差，沿x轴、y轴的电极错位以及转子中心相对电极中心的偏移对干扰力矩影响的性质及大小。
&&&&In this paper the drilling data produced by PROTEL are transferred to single chip microcomputer by computer, then the single chip microcomputer is used to control the X
axis and Y
axis step motors and Z
axis motor moving,so the PCB is auto NC drilled.
&&&&本文介绍通过计算机把PROTEL产生的钻孔数据传送给单片机 ,然后利用单片机控制微型台式钻孔机的X、Y轴的步进电机移动和Z轴电机的升降运动 ,实现电路板全自动数控钻孔 .
&&&&With the result that the moving platform of the new 3-TPS parallel robot only can move along Y,Z axis,and circle around Y axis,the parallel mechanism has three degrees of freedom,the authors draw the conclusion that,because of the constraint of the parallel mechanism,the new type 3-TPS parallel robot has three degrees of freedom.
&&&&用仿真方法分析了机构的奇异性,获得工作空间的可操作度变化范围. 结果新型3-TPS并联机器人的动平台只能作沿Y、Z两轴的平动和绕Y轴的转动,平行机构有3个自由度.
&&&&Through interpolation operation, the feed value of X and Y axis in every interpolation period was calculated to control the movement of relative axis.
&&&&通过插补运算,计算出每个插补周期内X、Y轴的进给量以控制相应轴的运动。
&&&&Errors in Y axis
&&&&Y向偏差
&&&&The accuracy correlation with the grid encode has shown that the repeatability of the 2D-BB are 1.1 micro-meters in the direction of X axis and 1.6 micro-meters in the direction of Y axis. The root mean square deviation is 0.3 micro-meters in the direction of X axis and 0.4 micro-meters in the direction Y axis separately.
&&&&结果表明,该装置X 向重复误差为1.1μm, 在Y 向重复误差为1.6μm,精度比对的均方根差值X 向为0.3μm,Y 向为0.4μm;
&&&&A main resonance at lilac ridge under vibrations about 100 Hz in the Y axis has been observed.
&&&&Y向振动时观察到100Hz左右人体髂部有共振。 这些发现有继续深入研究的价值。
&&&&Pointing to the real
time monitoring and control of small
circular vibration of the main vibration platform in graphite electrode abrading machine, the vibration of the main vibration
platform in X, Y axis is
detected by a eddy transducer with two probes.
&&&&针对石墨电极研磨机主振台微圆周振动轨迹实时监测与控制的要求 ,采用了双测头电涡流传感器分别检测主振台 X、Y向的振动 .
查询“y axis”译词为用户自定义的双语例句&&&&我想查看译文中含有：的双语例句
为了更好的帮助您理解掌握查询词或其译词在地道英语中的实际用法，我们为您准备了出自英文原文的大量英语例句，供您参考。&&&&&&&&&&&&&&&&&&&& The difficulties met in the automatic measurement of the carrier to noise ratio (CNR) for magneto-optical disks is discussed, and the spectrum signature of the signals produced by spectrum analyzer is analyzed. According to the particularity in CNR test, the measurement accuracy is
dependent only on the measurement error of the spectrum amplitudes of signal and noise at the carrier frequency, but not on the time when they are occurred. On the basis of comparison made between several data acquisition scheme... &&&&&&&&&&&&分析了实现磁光盘载噪比CNR指标自动化测试的障碍和谱信号的特性，针对CNR测试中存在的特殊性，即测试精度依赖于对载波频率处的信号谱幅值和噪声谱幅值的测量误差，而与两者出现的时间无关．提出单轴等时间测试方法，最大限度地利用8098微控制器的内部资源，在保证测试精度足够的基础上实现了数据采集电路结构最简．&&&&&&&& Now PCB usually uses professional software such as PROTEL for aided design, and it needs drilling after printed. In this paper the drilling data produced by PROTEL are transferred to single chip microcomputer by computer, then the single chip microcomputer is used to control the X
axis and Y
axis step motors and Z
axis motor moving,so the PCB is auto NC drilled.The design of controlling of double axes moving,coordinate display,sensor detecting and the hardware principle,and main s... &&&&&&&&&&&&目前电路板一般采用专业软件如PROTEL进行辅助设计 ,印板后一般需钻孔 .本文介绍通过计算机把PROTEL产生的钻孔数据传送给单片机 ,然后利用单片机控制微型台式钻孔机的X、Y轴的步进电机移动和Z轴电机的升降运动 ,实现电路板全自动数控钻孔 .本文着重介绍单片机控制两坐标联动、坐标显示及传感器检测的设计 ,并分析其硬件工作原理和主要软件设计过程 .实验表明 ,采用该设备与传统的手工加工相比可大大提高钻孔速度和精度&&&&&&&& This article introduces a kind of automatic typing equipment for metal surface. The positive and negative direction movement of X-axis and Y-axis stepping motors are controlled by SCM and in the control of power the equipment can type on the metal surface. &&&&&&&&&&&&本文介绍一种金属材料表面自动打字装置,该装置通过单片机控制,x.y轴步进电机正、反向运动,在动力源的作用下在金属表面打下所需要的字符。&nbsp&&&&相关查询:
在Springer中查有关
在知识搜索中查有关的内容
在数字搜索中查有关的内容
在概念知识元中查有关的内容
在学术趋势中查有关的内容
2008 CNKI－中国知网
北京市公安局海淀分局 备案号：110 1081725
&2008中国知网(cnki) 中国学术期刊(光盘版)电子杂志社}