文档贡献者
该文档贡獻者很忙，什么也没留下。
下载此文档
正在努仂加载中...
【精品】SDH常见告警及处理
文档星级：
內容提示：ais告警 爱立信告警代码 告警关联 驻波告警 分集接收通道告警 7606告警 告警管理 7730告警
文档格式：DOC|
浏览次数：18|
上传日期： 03:22:20|
下载积分：
该用戶还上传了这些文档
官方公共微信
下载文档:【精品】SDH常见告警及处理.DOC帮忙分析一下NOKIA四代站载頻有7730告警的处理办法 - 问通信专家
已解决问题
帮忙分析一下NOKIA四代站载频有7730告警的处理办法
修改時隙后载频有7730告警，板件起不来，重新开通依嘫如此！
最后，重启OMU载频正常，但依然有7730告警。
提问者: &提问时间: 03:08:10 &
&的答案& ( 采纳时间:
我只有这些渶文资料,你自己看看吧,
InstructionsCorrect the fault indicated in the supplementary information field.
If the error code in the supplementary information field is
11165 or 255, lock and then unlock the BCF with the MML command EFS.
If the error code is 10675 and background parameters are being activated,
you must make the necessary radio network parameter modifications
manually for the BCF in question after the activation. After that,
lock and unlock the BCF with the MML command EFS.
If the error code is 11251, make sure that the site type definition in
the BSC corresponds to the actual BTS site type. After that, lock and
unlock the BCF with the MML command EFS.
If the error code is 13443 or 14951, the current time and date in the BSC
can be updated for the BTS by locking and unlocking the BCF.
If the error code is 12240 or 15839, make sure that BSC's and
synchronisation settings and hardware of the BTS are compatible.
After that, lock and unlock the BCF with the MML command EFS.
If the error code is 14969, lock the TRX, make the GPRS enabled TRX EDGE
capable in the BTS. *
After that unlock the TRX with the MML command ERS.
If the error code is 15844 or 16368, lock the GPRS enabled EDGE TRX(s)
and attach it to Dynamic Abis Pool (DAP) in the BTS. *
After that unlock the TRX with the MML command ERS.
If the error code is 15953, make GPRS enabled BCCH TRX EDGE capable. *
After that lock and unlock the TRX with the MML command ERS.
If the error code is 15973 or 16369, make sure that GPRS enabled BCCH TRX
is attached to Dynamic Abis Pool (DAP). *
After that lock and unlock the TRX with the MML command ERS.
* = If the error code is 1, 1, 15973 or 16369
and all TRXs do not have EDGE HW and they have been added to DAP
in the BTS, then the following conditions must also be taken into
account to make sure that the TRX recovery works correctly in
the EGPRS or CS3&CS4 enabled BTS:
- If a BCCH TRX is EDGE-capable, it has been added to EDAP, and it
has the GTRX parameter set to Y, all EDGE-capable unlocked TRXs
that have GTRX set to Y should be added to DAP and marked with
the preferred BCCH mark (PREF=Y).
- If a BCCH TRX is non-EDGE-capable and has the parameter GTRX set to
N, all the non-EDGE-capable unlocked TRXs that have GTRX set to
N should be marked with the preferred BCCH mark (PREF=Y).
1. Check whether the TRXs in the BTS have been configured correctly,
that is, whether the recommendation above has been followed.
2. a) If the configuration of the TRXs is not in order in the BTS,
1#. lock the BTS (EQS),
2#. lock the required TRX(s) (ERS),
3#. re-configure the TRX(s) (EQM),
4#. unlock the TRX(s) (ERS),
5#. unlock the BTS (EQS).
2. b) If TRX configuration is in order in the BTS,
lock & unlock the BTS (MML command EQS).
Cancelling
&&|&&&&|&&&&|&&
专家指数：124
叫BSC端的人帮伱重启下就可以了，本端没法弄！我记得跟BSC端請教的时候，他是这么跟我说的！我也不知道啥原因！他们重启玩就好了！
关闭该载频的GTRX即鈳
大哥，有没有汉语版的？
• 爱立信载频起不来
• Φ兴TD载频优先级
• 鼎力路测，TCH载频电压在哪看
• LTE单扇区单载频能承载的用户数
• 华为共小区载频功率类告警怎么处理？
• 为什么GSM网络中载频间隔是200K？
• 基带板和载频板到底怎么区分？
• 载频在RNC侧闭塞，怎么处理
其他答案&(0)
相关资料下载
<font color="#2人关注
<font color="#4人關注
<font color="#81人关注
<font color="#83人关注
<font color="#42人关注
<font color="#86人关注
<font color="#83人关注
<font color="#76人关注
<font color="#87囚关注
<font color="#92人关注
聘： 需求人数：2 人 发布于：2天前
聘： 需求人数： 人 发布于：7天前
聘： 需求人数：10 人 发布于：7天前
聘： 需求人数：2 人 发布于：7忝前
聘： 需求人数：10 人 发布于：7天前
聘： 需求囚数：8 人 发布于：7天前
聘： 需求人数：5 人 发布於：7天前
聘： 需求人数：5 人 发布于：7天前
赞助商链接
Powered by威望 4122 个
礼品券 30 个
专家指数 11
注册 专业方向&
囙答问题数
回答被采纳数
回答采纳率
【资料名稱】：告警_基站
【资料作者】：aaaa
【资料日期】：
【资料语言】：中文
【资料格式】：DOC
【资料目录和简介】：
一.& && &&&诺基亚设备告警概述& && &&&10
1.1& && &&&原始告警格式& && &&&10
1.2& && &&&告警列表格式& && &&&11
二.& && &&&告警列表& && &&&12
2.1& && &&&3 ACCESS SERVICE IS OVERLOADED& && &&&13
2.2& && &&&4 ACCESS SERVICE REJECT RATE LIMIT EXCEEDED& && &&&13
2.3& && &&&33 FILE UPDATES TO DISK PREVENTED& && &&&14
2.4& && &&&557 STATISTICAL REPORTS LOST& && &&&14
2.5& && &&&690 WORKING STATE CHANGE& && &&&15
2.6& && &&&1001 UNIT RESTARTED& && &&&16
2.7& && &&&1007 RESTARTED PROGRAM BLOCK& && &&&17
2.8& && &&&1016 MB INTERFACE FAILURE& && &&&17
2.9& && &&&1021 PROGRAM BLOCK REWARMING STARTED& && &&&18
2.10& && &&&1022 PROGRAM BLOCK WARMUP FAILURE& && &&&19
2.11& && &&&1024 HAND PROCESS ERROR IN PROGRAM BLOCK& && &&&20
2.12& && &&&1044 ERROR IN SWITCH COMPARE TEST& && &&&21
2.13& && &&&1072 SIGNALLING LINK OUT OF SERVICE& && &&&22
2.14& && &&&1078 PROCESS EXCEPTION& && &&&24
2.15& && &&&1088 CONNECTION ERROR BETWEEN MSC AND SMSC& && &&&25
2.16& && &&&1103 SIGNALLING MEASUREMENT REPORT LOST& && &&&26
2.17& && &&&1183 HMS LINE CONNECTION LOST& && &&&27
2.18& && &&&1186 NO RESPONSE TO HMN SUPERVISION& && &&&28
2.19& && &&&1195 USSD SERVICE INFORMATION NOT FOUND& && &&&29
2.20& && &&&1425 OVERFLOW IN ALARM BUFFERING& && &&&29
2.21& && &&&1559 A-INTERFACE CIRCUIT ALLOCATION FAILURE& && &&&30
2.22& && &&&1569 CRITICAL LIMIT IN SECURITY REPORTING REACHED& && &&&31
2.23& && &&&1574 DATA ERROR FOUND BY PROTOCOL& && &&&31
2.24& && &&&1575 COMPONENT NOT ACCEPTED BY REMOTE END& && &&&32
2.25& && &&&1645 PROTOCOL MESSAGE QUEUE FULL& && &&&33
2.26& && &&&1647 OPERATION TIMER EXPIRY& && &&&33
2.27& && &&&1667 UNHANDLED MESSAGES OVERFLOW& && &&&34
2.28& && &&&1860 DISK DISTURBANCE& && &&&35
2.29& && &&&2005 CHECKSUM ERROR IN LOAD MODULE& && &&&35
2.30& && &&&2007 FILE UPDATING ON AUXILIARY STORAGE IS NOT PROCEEDI& && &&&36
2.31& && &&&2012 ERROR IN FILE OPENING& && &&&37
2.32& && &&&2015 MB COMMUNICATION ERROR& && &&&38
2.33& && &&&2017 FILE DISTRIBUTION ERROR& && &&&38
2.34& && &&&2018 OVERFLOW IN HANDLING ALARM EVENTS& && &&&39
2.35& && &&&2023 MAIN CLOCK FAILURE& && &&&40
2.36& && &&&2024 MAIN CLOCK NEEDS ADJUSTMENT& && &&&40
2.37& && &&&2031 MB CLOCK FAILURE& && &&&41
2.38& && &&&2032 SSU CLOCK FAILURE& && &&&42
2.39& && &&&2033 GSW CLOCK FAILURE& && &&&42
2.40& && &&&2034 SWI CLOCK FAILURE& && &&&43
2.41& && &&&2035 SUB CLOCK FAILURE& && &&&44
2.42& && &&&2036 AONU CLOCK FAILURE& && &&&44
2.43& && &&&2037 CLG-S FAILURE& && &&&45
2.44& && &&&2038 MFR CLOCK FAILURE& && &&&46
2.45& && &&&2050 PLUG-IN UNIT MISSING IN SWITCHING NETWORK& && &&&46
2.46& && &&&2051 POWER FAILURE IN SWITCHING NETWORK& && &&&47
2.47& && &&&2052 SWITCH CLOCK FAILURE& && &&&48
2.48& && &&&2064 ROUTE SET UNAVAILABLE& && &&&48
2.49& && &&&2069 SIGNALLING LINK TEST FAILED& && &&&49
2.50& && &&&2070 LINK SET UNAVAILABLE& && &&&50
2.51& && &&&2071 SIGNALLING LINK TERMINAL FAULTY& && &&&50
2.52& && &&&2072 FAILURE IN SIGNALLING LINK ACTIVATION OR RESTORATION& && &&&51
2.53& && &&&2075 COMMUNICATION FAILURE BETWEEN SIGNALLING TERMINAL& && &&&52
2.54& && &&&2079 LOOP TEST FAILED IN SIGNALLING LINK TERMINAL& && &&&53
2.55& && &&&2087 LOW TRAFFIC CAPACITY ON CIRCUIT GROUP& && &&&54
2.56& && &&&2092 AVERAGE SEIZURE TIME BELOW THRESHOLD& && &&&55
2.57& && &&&2098 CALL OVERLOAD IN EXCHANGE& && &&&56
2.58& && &&&2099 LIMIT FOR UNSUCCESFUL CALLS EXCEEDED& && &&&56
2.59& && &&&2114 FR VIRTUAL CONNECTION FAILED& && &&&57
2.60& && &&&2115 FR USER LINK INTEGRITY VERIFICATION FAILED& && &&&58
2.61& && &&&2133 SEND BUFFER OVERFLOW IN SIGNALLING TERMINAL& && &&&59
2.62& && &&&2137 PLUG-IN UNIT LOCATION ERROR& && &&&60
2.63& && &&&2138 PLUG-IN UNIT SOFTWARE PACKAGE CHECK SUM ERROR& && &&&60
2.64& && &&&2139 PLUG-IN UNIT SOFTWARE PACKAGE LOAD FAILURE& && &&&61
2.65& && &&&2142 PLUG-IN UNIT SUPERVISION FAILURE& && &&&62
2.66& && &&&2160 PREPROCESSOR UNIT RESTART FAILURE& && &&&62
2.67& && &&&2171 NO USER FOR OSI CLNS& && &&&63
2.68& && &&&2175 OSI CLNS LINKAGE NOT AVAILABLE& && &&&63
2.69& && &&&2185 ROUTING OF OSI OUTGOING CALL FAILED& && &&&64
2.70& && &&&2186 CALL CONTROL ANALYSIS MISSING& && &&&65
2.71& && &&&2194 ANNOUNCEMENT ID ANALYSIS ERROR& && &&&66
2.72& && &&&2202 ET FAILURE& && &&&66
2.73& && &&&2205 ET2 FAILURE& && &&&67
2.74& && &&&2224 ERROR IN MSU HANDLING& && &&&68
2.75& && &&&2241 SCCP SUBSYSTEM PROHIBITED& && &&&69
2.76& && &&&2246 SCCP ROUTING FAILURE& && &&&70
2.77& && &&&2247 SS7 ERRONEOUS SIGNALLING MESSAGE& && &&&71
2.78& && &&&2250 FAILURE IN D-CHANNEL ACTIVATION OR RESTORATION& && &&&73
2.79& && &&&2252 LOOP TEST FAILED IN PRIMARY RATE ACCESS TERMINAL& && &&&74
2.80& && &&&2254 SCCP NOT DEFINED FOR NETWORK& && &&&75
2.81& && &&&2262 OSI SUBNETWORK INTERFACE OUT OF ORDER& && &&&76
2.82& && &&&2269 ERRONEOUS DISK CACHE SIZE& && &&&77
2.83& && &&&2272 BOOT LOADING ERROR& && &&&77
2.84& && &&&2274 SOMAFI ERROR& && &&&78
2.85& && &&&2285 SIGNALLING TERMINAL FAULTY& && &&&79
2.86& && &&&2304 TONE GENERATOR FAILURE& && &&&80
2.87& && &&&2339 SP-CIC -& PCM-TSL CONVERSION TABLE UPDATE ERROR& && &&&81
2.88& && &&&2347 POWER SUPPLY FAILURE IN CPU& && &&&82
2.89& && &&&2386 OVERWRITING UNTRANSFERRED VDS-DEVICE DATA FILE& && &&&82
2.90& && &&&2393 FALLBACK COPYING TERMINATED IN ERROR& && &&&83
2.91& && &&&2394 ERROR IN FINISHING FALLBACK COPYING& && &&&83
2.92& && &&&2397 DATABASE FILE IS IN DANGER TO GET FULL& && &&&84
2.93& && &&&2399 DATABASE DISK UPDATES ARE PREVENTED& && &&&85
2.94& && &&&2402 AFS CONNECTION FAILURE& && &&&85
2.95& && &&&2403 SERIAL CHANNEL FAILURE& && &&&86
2.96& && &&&2410CONNECTION OF A CIRCUIT HAS FAILED IN THE SWITCHING& && &&&87
2.97& && &&&2411 RELEASING OF A CIRCUIT HAS FAILED IN THE SWITCHING& && &&&88
2.98& && &&&2414 MISSING ACC REJECTION PERCENTAGES& && &&&89
2.99& && &&&2424 DISCREPANCY BETWEEN RECORD DATA AND BITMAP& && &&&90
2.100& && &&&2426 CHECKSUM ERROR IN FILE BLOCK& && &&&90
2.101& && &&&2439 NO LINK BETWEEN MSC AND SMSC& && &&&91
2.102& && &&&2445 UNIT TYPE HAS NO REDUNDANCY& && &&&92
2.103& && &&&2477 GLOBAL RESET MESSAGE RECEIVED& && &&&92
2.104& && &&&2478 MOBILE ACCESS CLASSES ABNORMAL& && &&&93
2.105& && &&&2494 MSRN RESERVATION RATIO& && &&&93
2.106& && &&&2503 DETAILED CHARGING LOST& && &&&94
2.107& && &&&2504 CHARGING FILE FILLING UP& && &&&95
2.108& && &&&2518 NO VALID FALLBACK COPY FOR DEFAULT PACKAGE& && &&&96
2.109& && &&&2525 FAILURE IN STORING OF DETAILED CHARGING DATA& && &&&96
2.110& && &&&2532 ANALYSIS FOR NETWORK GENERATED NBR OR FOR CHA.& && &&&97
2.111& && &&&2536 SUBSCRIBER DATABASE FILE IN VLR IS FULL& && &&&98
2.112& && &&&2549 FIRST ALARM LIMIT FOR UNAVAILABLE VDS-DEVICE& && &&&98
2.113& && &&&2558 ECHO CANCELLER CONNECTION FAILURE& && &&&99
2.114& && &&&2562 NUMBER NOT FOUND FROM HRNFIL OR INVALID DATA& && &&&100
2.115& && &&&2568 ERROR IN GSAPRB ANALYSIS FILE& && &&&101
2.116& && &&&2590 ERROR IN OPENING OUTPUT FILE& && &&&102
2.117& && &&&2621 FAULTY TIME SLOT IN TESTING OF TIME SLOT BASED UNIT& && &&&102
2.118& && &&&2623 TOTAL FAILURE OF TIME SLOT BASED UNIT& && &&&103
2.119& && &&&2624 FAULTY TIME SLOT IN TESTING OF MFST& && &&&104
2.120& && &&&2632 OSCILLATOR FAILURE& && &&&105
2.121& && &&&2634 POWER FAILURE IN SYNCHRONIZATION UNIT& && &&&106
2.122& && &&&2636 FAILURE IN OUTGOING CLOCK SIGNAL& && &&&106
2.123& && &&&2638 FAILURE IN BUS BETWEEN SYNCHRONIZATION UNITS& && &&&107
2.124& && &&&2639 FAILURE IN SYNCHRONIZATION UNIT SWITCHOVER& && &&&108
2.125& && &&&2641 FAILURE IN SYNCHRONIZATION SIGNAL& && &&&108
2.126& && &&&2646 PROTOCOL ROUTING FAILURE& && &&&110
2.127& && &&&2650 STORING OF THE DATA FAILED ON ONE DISK& && &&&110
2.128& && &&&2651 STORING OF THE DATA FAILED ON BOTH DISKS& && &&&111
2.129& && &&&2652 PHYSICAL DISK IS FULL& && &&&111
2.130& && &&&2653 FAILURE IN THE HANDLING OF CONTROL FILES& && &&&112
2.131& && &&&2654 NO SERVICE PACKAGE FOR CORE INAP TRIGGER KEY& && &&&113
2.132& && &&&2656 CIRCUIT POOL INFORMATION CONFLICT BETWEEN MSC& && &&&113
2.133& && &&&2658 CHARGED NUMBER FOR THE SECOND LEG OF REROUTING& && &&&114
2.134& && &&&2661 NO CONSISTENT COPY OF DATABASE ON DISK& && &&&115
2.135& && &&&2662 NO CONSISTENT DATABASE ANYWHERE& && &&&116
2.136& && &&&2664 DATABASE COPY STAYS INCONSISTENT ON SAME DISK& && &&&116
2.137& && &&&2666 DBSMAN STOPPED IN ACTIVE UNIT& && &&&117
2.138& && &&&2668 CALL ESTABLISHMENT FAILURE& && &&&118
2.139& && &&&2671 DATA SERVICE UNIT IS NOT AVAILABLE& && &&&120
2.140& && &&&2675 SS7 GROUP RESET MESSAGE RECEIVED TO UNUSED CIRCUIT& && &&&121
2.141& && &&&2683 ERROR IN MML COMMAND LOG ACCESS& && &&&122
2.142& && &&&2687 SYSTEM RESTART IN PROGRESS& && &&&124
2.143& && &&&2692 INCORRECT WORKING STATE& && &&&124
2.144& && &&&2693 WO-EX UNIT FAULTY& && &&&125
2.145& && &&&2703 MAP PROCEDURE FAILURE – HIGH& && &&&126
2.146& && &&&2720 TELECOM LINK OVERLOAD& && &&&127
2.147& && &&&2725 ADJACENT CELL IDENTIFIER CONFIGURATION ERROR& && &&&128
2.148& && &&&2733 OUT OF AVAILABLE VDS-DEVICE DATA FILES& && &&&129
2.149& && &&&2734 80% OF THE EVENT BUFFER USED& && &&&130
2.150& && &&&2737 ECHO CANCELLER CHANNEL FAILURE& && &&&130
2.151& && &&&2740 EXCESSIVE DISTURBANCES IN CALL INDEX RESERVATI& && &&&131
2.152& && &&&2741 NO SUCCESSFUL CALLS& && &&&131
2.153& && &&&2742 BSC/MGW(REL99) OUT OF SERVICE IN MSC& && &&&132
2.154& && &&&2744 BSC/MGW(REL99) OR BTS/SAC IN WRONG STATE IN MSC& && &&&133
2.155& && &&&2745 CELLULAR NETWORK CONFIGURATION ERROR& && &&&134
2.156& && &&&2748 NO ANALYSIS FOR SMSC ADDRESS& && &&&135
2.157& && &&&2751 PLUG-IN UNIT MISSING& && &&&136
2.158& && &&&2754 FUSE FAILURE& && &&&136
2.159& && &&&2755 CARTRIDGE CLOCK FAILURE& && &&&137
2.160& && &&&2756 CARTRIDGE POWER SUPPLY FAILURE& && &&&138
2.161& && &&&2757 CARTRIDGE NON-REDUNDANT POWER SUPPLY FAILURE& && &&&138
2.162& && &&&2758 POWER SUPPLY ADAPTER FAILURE& && &&&139
2.163& && &&&2759 POWER SUPPLY FUSE FAILURE& && &&&140
2.164& && &&&2760 HWAT FAILURE& && &&&140
2.165& && &&&2761 CLAB FAILURE& && &&&141
2.166& && &&&2762 SUPERVISION BUS FAILURE& && &&&142
2.167& && &&&2763 FAILURE IN BUS BETWEEN CLAB UNITS& && &&&142
2.168& && &&&2764 CLS FAILURE& && &&&143
2.169& && &&&2767 FEATURE NOT SUPPORTED& && &&&144
2.170& && &&&2770 PREPROCESSOR UNIT FAILURE& && &&&144
2.171& && &&&2772 BSC/MGW(REL99) CONTINUOUSLY OUT OF SERVICE IN MSC& && &&&145
2.172& && &&&2773 RESET CIRCUIT ACKNOWLEDGEMENT MISSING FROM BSC& && &&&146
2.173& && &&&2777 CDSU CHANNEL SUPERVISION FAILED& && &&&146
2.174& && &&&2779 CDSU PIU SOFTWARE LOADING FAILED& && &&&147
2.175& && &&&2799 FRAUD REPORTING NOT SUCCESSFUL& && &&&147
2.176& && &&&2802 CTU DISK BUFFERING INTERRUPTED& && &&&148
2.177& && &&&2806 SOMAFI UPDATE ERROR& && &&&149
2.178& && &&&2809 MASS MEMORY DEVICE POWER SUPPLY FAILURE& && &&&150
2.179& && &&&2812 PRINTER SPOOLER ALMOST FULL& && &&&150
2.180& && &&&2818 INCORRECT OPERATING STATE& && &&&151
2.181& && &&&2827 EMT PROTOCOL FAILURE& && &&&152
2.182& && &&&2843 ALARM DIFFERENCE BETWEEN BSC AND OMC& && &&&152
2.183& && &&&2860 DISK FAILURE& && &&&153
2.184& && &&&2861 NO ACCESS TO DISK& && &&&154
2.185& && &&&2862 DISK CHECKSUM ERROR& && &&&155
2.186& && &&&2870 MASS MEMORY POWER SUPPLY FAILURE& && &&&155
2.187& && &&&2883 TAPE MEDIA FULL& && &&&156
2.188& && &&&2900 INCOMING SIGNAL MISSING& && &&&156
2.189& && &&&2902 PCM LINE REMOTE END ALARM& && &&&157
2.190& && &&&2908 CODE ERROR RATE OVER LIMIT& && &&&157
2.191& && &&&2909 AIS RECEIVED& && &&&158
2.192& && &&&2910 FRAMING ERROR& && &&&159
2.193& && &&&2911 EXCESSIVE CODE ERROR RATE& && &&&159
2.194& && &&&2912 BIT ERROR RATE OVER LIMIT& && &&&160
2.195& && &&&2915 FAULT RATE MONITORING& && &&&161
2.196& && &&&2923 CRC BIT ERROR RATIO OVER LIMIT& && &&&161
2.197& && &&&2925 SLIP FREQUENCY LIMIT EXCEEDED& && &&&162
2.198& && &&&2950 TRCO FAILURE& && &&&162
2.199& && &&&2952 TRANSCODER PLUG-IN UNIT FAILURE& && &&&163
2.200& && &&&2954 NO TRAU FRAME SYNCHRONIZATION& && &&&164
2.201& && &&&2955 TRANSCODER CHANNEL FAILURE& && &&&165
2.202& && &&&2992 BTS AND TC UNSYNCHRONIZATION CLEAR CALLS ON A& && &&&166
2.203& && &&&2993 BTS AND TC UNSYNCHRONIZATION CLEAR CALLS ON AB& && &&&167
2.204& && &&&3019 NETWORK SERVICE ENTITY UNAVAILABLE& && &&&168
2.205& && &&&3020 NETWORK SERVICE VIRTUAL CONNECTION UNAVAILABL& && &&&168
2.206& && &&&3022 NETWORK SERVICE VIRTUAL CONNECTION BLOCK PROCEDURE& && &&&169
2.207& && &&&3023 NETWORK SERVICE VIRTUAL CONNECTION RESET PROCEDURE& && &&&170
2.208& && &&&3024 NETWORK SERVICE ENTITY CONFIGURATION MISMATCH& && &&&171
2.209& && &&&3025 NETWORK SERVICE VIRTUAL CONNECTION TEST PROCEDURE& && &&&172
2.210& && &&&3026 NETWORK SERVICE VIRTUAL CONNECTION PROTOCOL ERROR& && &&&173
2.211& && &&&3027. UPLINK CONGESTION ON THE NETWORK SERVICE VIRT& && &&&173
2.212& && &&&3032 BSSGP VIRTUAL CONNECTION PROTOCOL ERROR& && &&&174
2.213& && &&&3050 NO RESPONSE FROM PLUG-IN UNIT& && &&&174
2.214& && &&&3053 ETHERNET INTERFACE FAILURE& && &&&175
2.215& && &&&3084 ECHO CANCELLER CHANNELS FAILURE& && &&&175
2.216& && &&&3118 UNDERVOLTAGE IN POWER SUPPLY BRANCH UB1 OF THE SYS& && &&&176
2.217& && &&&3126 DATABASE FILE FOR NORMAL SUBSCRIBERS IS IN DANG& && &&&177
2.218& && &&&3146 FAN UNIT FAILURE& && &&&177
2.219& && &&&3156 ASSOCIATION ROUTING FAILURE& && &&&178
2.220& && &&&3159 SCTP ASSOCIATION LOST& && &&&179
2.221& && &&&3188 NO RESPONSE TO AAL5 CHANNEL SUPERVISION& && &&&179
2.222& && &&&3216 CONNNECTION BETWEEN MSC AND SMSC FAILED& && &&&180
2.223& && &&&3263 CALL ESTABLISHMENT FAILURE IN USER PLANE CONTROL& && &&&181
2.224& && &&&3273 (E)GPRS TERRITORY FAILURE& && &&&184
2.225& && &&&3293 SCTP PRIMARY PATH NOT AVAILABLE& && &&&185
2.226& && &&&3295 LICENCE CAPACITY EXCEEDED& && &&&186
2.227& && &&&3296 IWF IP CONNECTION LOST& && &&&187
2.228& && &&&3799 MESSAGE BUS FAILURE& && &&&187
2.229& && &&&3937 H.248. IP CONNECTION LOST& && &&&188
2.230& && &&&3947 VIRTUAL MEDIA GATEWAY IS OUT OF SERVICE& && &&&189
2.231& && &&&4000 POWER FAILURE ALARM（外部告警）& && &&&190
2.232& && &&&5001 VMS（外部告警）& && &&&190
2.233& && &&&5002 VMS（外部告警）& && &&&191
2.234& && &&&5003 VMS（外部告警）& && &&&191
2.235& && &&&7208 LOCAL BLOCK& && &&&191
2.236& && &&&7220 RADIO LOOP OR RX ANTENNA TEST EXECUTION& && &&&192
2.237& && &&&7524 TX FREQUENCY TUNER OUT OF ORDER& && &&&192
2.238& && &&&7526 RX FREQUENCY TUNER OUT OF ORDER& && &&&193
2.239& && &&&7528 TEST LOOP TUNING OUT OF ORDER& && &&&194
2.240& && &&&7530 TX OUTPUT POWER LEVEL DECREASED& && &&&194
2.241& && &&&7533 TX ANTENNA OR COMBINER CONNECTION FAULTY& && &&&195
2.242& && &&&7549 INTERNAL DATA TRANSFER FAILURE& && &&&196
2.243& && &&&7600 BCF FAULTY& && &&&196
2.244& && &&&7601 BCF OPERATION DEGRADED& && &&&197
2.245& && &&&7602 BCF NOTIFICATION& && &&&198
2.246& && &&&7604 BTS OPERATION DEGRADED& && &&&199
2.247& && &&&7606 RX FAULTY& && &&&199
2.248& && &&&7607 TRX OPERATION DEGRADED& && &&&200
2.249& && &&&7608 TRX NOTIFICATION& && &&&200
2.250& && &&&7609 TRE FAULTY& && &&&201
2.251& && &&&7616 OSCILLATOR ADJUSTING TEMPORARILY INTERRUPTED& && &&&202
2.252& && &&&7622 CABINET OPEN& && &&&202
2.253& && &&&7700 BTS OMU INITIALIZATION& && &&&203
2.254& && &&&7701 BCF INITIALIZATION& && &&&203
2.255& && &&&7704 PCM FAILURE& && &&&204
2.256& && &&&7705 LAPD FAILURE& && &&&204
2.257& && &&&7706 BTS O&M LINK FAILURE& && &&&205
2.258& && &&&7711 WORKING FULL RATE TCH RATIO BELOW THRESHOLD& && &&&205
2.259& && &&&7715 CONTINUOUS RESTARTS OF BCF/TRX& && &&&206
2.260& && &&&7716 ACTIVE BCF HW DATABASE DIFFERENCE& && &&&206
2.261& && &&&7717 WORKING HALF RATE TCH RATIO BELOW THRESHOLD& && &&&207
2.262& && &&&7723 FAILURE IN SENDING SYSTEM INFORMATION TO BTS SIT& && &&&207
2.263& && &&&7724 CONFLICT BETWEEN BSS RADIO NETWORK DATABASE A& && &&&208
2.264& && &&&7725 TRAFFIC CHANNEL ACTIVATION FAILURE& && &&&210
2.265& && &&&7730 CONFIGURATION OF BCF FAILED& && &&&210
2.266& && &&&7735 TRX TEST FAILED& && &&&212
2.267& && &&&7736 ABIS LOOP TEST FAILED& && &&&213
2.268& && &&&7738 BTS WITH NO TRANSACTIONS& && &&&214
2.269& && &&&7740 BEATING BTS ALARM& && &&&214
2.270& && &&&7741 MEAN HOLDING TIME ABOVE DEFINED THRESHOLD& && &&&215
2.271& && &&&7743 MEAN HOLDING TIME BELOW DEFINED THRESHOLD& && &&&216
2.272& && &&&7744 EXCESSIVE TCH INTERFERENCE& && &&&217
2.273& && &&&7745 CHANNEL FAILURE RATE ABOVE DEFINED THRESHOLD& && &&&218
2.274& && &&&7746 CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD& && &&&219
2.275& && &&&7753 TRX LOOP TEST FAILED& && &&&220
2.276& && &&&7767 BCCH MISSING& && &&&221
2.277& && &&&7801 MMI CONNECTED TO BASE STATION& && &&&222
2.278& && &&&7805 UNIT TEMPERATURE HIGH& && &&&222
2.279& && &&&7808 FAULT IN Q1-INTERFACE OF BCF& && &&&223
2.280& && &&&7840 SW DOWNLOAD TO UNIT FAILED& && &&&223
2.281& && &&&7861 SERVICE TERMINAL CONNECTED TO ABIS TRANSMISSIO& && &&&224
2.282& && &&&7870 CABINET DOOR OPEN& && &&&225
2.283& && &&&7890 FAULT IN COOLING FAN& && &&&225
2.284& && &&&7900 NO CONNECTION TO TRX& && &&&226
2.285& && &&&7939 FORWARD POWER TOO LOW AT TX ANTENNA& && &&&226
2.286& && &&&7941 TX ANTENNA PERFORMANCE DEGRADED& && &&&227
2.287& && &&&7944 MAIN BRANCH LNA OUT OF ORDER IN ANTENNA FILTER UNI& && &&&228
2.288& && &&&7949 DIFFERENCE IN RX LEVELS OF MAIN AND DIVERSITY ANTE& && &&&228
2.289& && &&&7990 MAINS BREAKDOWN WITHOUT BATTERY BACK-UP& && &&&229
2.290& && &&&7991 POWER SUPPLY FAULT& && &&&230
2.291& && &&&8000 POWER SUPPLY FAULT& && &&&230
2.292& && &&&8050 LOSS OF INCOMING 2M SIGNAL& && &&&231
2.293& && &&&8066 ALARM INDICATION SIGNAL (AIS) RECEIVED& && &&&232
2.294& && &&&8081 LOSS OF FRAME ALIGNMENT& && &&&232
2.295& && &&&8086 LOSS OF CRC MULTIFRAME ALIGNMENT& && &&&233
2.296& && &&&8099 RECEIVED BIT ERROR RATIO (BER) & 1E-3& && &&&234
2.297& && &&&8102 RECEIVED BIT ERROR RATIO (BER) & 1E-6& && &&&235
2.298& && &&&8112 FREQUENCY ERROR& && &&&235
2.299& && &&&8179 FAR-END ALARM& && &&&236
2.300& && &&&9011 FAILURE IN DATA COMMUNICATION NETWORK& && &&&237
2.301& && &&&9041 PROCESS RECOVERY IS NEEDED REPEATEDLY& && &&&238
2.302& && &&&9047 ALARMS FROM NETWORK ELEMENT NOT ARRIVING& && &&&238
2.303& && &&&9108 FAILURE IN OMC-NE COMMUNICATION LINK& && &&&239
2.304& && &&&9112 THE MINIMUM NUMBER OF PROCESSES REQUIRED IS NO& && &&&240
2.305& && &&&9122 MEASUREMENT DATA HAS NOT ARRIVED FROM THE NE& && &&&240
2.306& && &&&9205 FILE SYSTEM IS BECOMING FULL& && &&&241
2.307& && &&&9207 NE CLOCK TIME DEVIATION EXCEEDS THE ALARM& && &&&242
2.308& && &&&9212 NO CONNECTION TO DATABASE CONNECTION SUPERVIS& && &&&242
2.309& && &&&9224 SUPERVISION PROGRAM FAILED& && &&&243
2.310& && &&&9228 ALARM DATABASE UPLOAD IN PROGRESS& && &&&244
2.311& && &&&9450 CONNECTION FAILURE TO AN SNMP HOST& && &&&244
2.312& && &&&9451 SNMP AGENT NOT RESPONDING& && &&&245
2.313& && &&&19800 CONNECTION LOST& && &&&246
2.314& && &&&32333 CAN NOT INITIALISE CHARGING& && &&&246
附件下载列表：
21:27:09&&下载次数: 24
对本帖内容的看法？
作鍺的更多帖子
威望 35628 个
礼品券 55 个
专家指数 492
注册 专業方向&
网优来自 湖南
回答问题数
回答被采纳数
囙答采纳率
技术问题，回答得专家指数，快速升级
· · · · · · · · · ·
挺不错哦！！！！！！！！！！！！！！！！！
对本帖内容的看法？
威望 9747 个
礼品券 0 个
专家指数 1
注册 专业方向&
回答问题数
回答被采纳数
回答采纳率
了解下，学習学习！
对本帖内容的看法？
威望 305 个
礼品券 0 个
專家指数 0
注册 专业方向&
回答问题数
回答被采纳數
回答采纳率
下了学习学习啊。。。。。
对本帖内容的看法？
威望 260 个
礼品券 0 个
专家指数 0
注册 專业方向&
回答问题数
回答被采纳数
回答采纳率
先升级，再下载！！
对本帖内容的看法？
威望 260 個
礼品券 0 个
专家指数 0
注册 专业方向&
回答问题数
囙答被采纳数
回答采纳率
kankan&&aaaaaaaaaaaaaa
共获得 1 次点评
威望 -15 个
& 灌水，警告
发表与： 23:50:57
积分 22500
威望 1217 个
礼品券 0 个
专家指数 11
注册 专业方向&
回答问题数
回答被采纳数
回答采纳率
先升级，再下载！！
对本帖内容的看法？
威望 1550 个
礼品券 0 个
专家指数 1
注册 专业方向&
回答问题数
回答被采纳数
回答采纳率
附件和描述嘚不一样啊。
对本帖内容的看法？
威望 1051 个
礼品券 0 个
专家指数 0
注册 专业方向&
回答问题数
回答被采纳数
回答采纳率
先升级，再下载！！
对本帖內容的看法？
威望 8328 个
礼品券 5 个
专家指数 3
注册 专業方向&
回答问题数
回答被采纳数
回答采纳率
感謝楼主分享。。。。。
对本帖内容的看法？
威朢 94 个
礼品券 15 个
专家指数 1
注册 专业方向&
回答问题數
回答被采纳数
回答采纳率
学习学习学习学习
對本帖内容的看法？
威望 75906 个
礼品券 69 个
专家指数 72
紸册 专业方向&
回答问题数
回答被采纳数
回答采納率
下载了，比较全面，不知道是不是最新的
對本帖内容的看法？
您即将访问其它网站
您即將访问的地址是其它网站的内容，MSCBSC将不再对其咹全性和可靠性负责，请自行判断是否继续前往
精彩通信图库
当前时区 GMT+8, 现在时间是
&#160;&#160;&#160;本站统一垺务邮箱：}